Deleted default profiles for K95 RGB Platinum

I just got my K95 RGB Platinum, and by updating the firmware, it deleted the three default profiles. They were called:

"K95P HW1"

"K95P HW2"

"K95P HW3"

I can't find them to download anywhere. I've tried to recreate them, but a feature that I can't seem to change, that they had, was that the profile switch key on the keyboard would change colors when I'd switch to the different default profiles. Now that they are deleted, all of my profiles keep the same color on the key. I know that this color can be changed, but it stays the same across all profiles. I can't figure out how to change it per profile. Thanks

Unplug your K95P and then plug it in again while pressing the ESC button, If I recall right that should reset the onboard profile so you have again the default ones.

Or maybe it was pressing PAG UP + PAG DOWN, try both things.

Unplug your K95P and then plug it in again while pressing the ESC button, If I recall right that should reset the onboard profile so you have again the default ones.

 

Or maybe it was pressing PAG UP + PAG DOWN, try both things.

It worked for me while reinserting the keyboard press ESC it will reset the keyboard

@Mr_Rata:

1: Unplug both usb's of the keyboard from the computer

2: Quit the CUE Program

3: Press and hold the escape button on the keyboard

4: With the escape button held down, plug in the keyboard

5: After a couple seconds, release the escape button

6: Wait about 30 seconds, and then replug the keyboard

7: Open CUE

@Mr_Rata:

1: Unplug both usb's of the keyboard from the computer

2: Quit the CUE Program

3: Press and hold the escape button on the keyboard

4: With the escape button held down, plug in the keyboard

5: After a couple seconds, release the escape button

6: Wait about 30 seconds, and then replug the keyboard

7: Open CUE

Thx It has worked!