Corsair SSD F60-A did not reconize on cold boot

[TheShadow2012]

RAM GUY, please I need help.
I have a Dell Vostro 3550 and I bought a Corsair SSD F60-A (60GB) and updated the notebook.
Since the SSD installation all the cold boots not recognize the SSD, and I need to CTRL+ALT+DEL to restart (warm boot) to the SSD be recognized.
I wait some time to see if Dell launch a new BIOS; and last week I updated to the BIOS new version, A10, but anyway stays the same.
My SSD was already with the 2.4 firmware version since I bought and saw the problem, I updated the SSD expecting better function.
I do not know how to work with this anymore.
Thanks.
Regards.

[Turbonerfs101e]

Hi TheShadow2012

Very strange problem
Do you take sata driver from Intel
As dell is not up to date.
Ther version is 10.1.0.1008 and it take version 11 for SSD use
The latess version is 11.2.0.1006
http://downloadcenter.intel.com/Deta...&DownloadType=
http://downloadcenter.intel.com/Deta...river&lang=eng
I give you link for both, but AHCI and raid driver is the same

If driver don't change any ting
If you got the passibility you should test SSD in other system to see if it defec or it is yous system that have a bug

Hope this help
Sincerly yours

[TheShadow2012]

Originally Posted by Turbonerfs101e

Hi TheShadow2012

Very strange problem
Do you take sata driver from Intel
As dell is not up to date.
Ther version is 10.1.0.1008 and it take version 11 for SSD use
The latess version is 11.2.0.1006
http://downloadcenter.intel.com/Deta...&DownloadType=
http://downloadcenter.intel.com/Deta...river&lang=eng
I give you link for both, but AHCI and raid driver is the same

If driver don't change any ting
If you got the passibility you should test SSD in other system to see if it defec or it is yous system that have a bug

Hope this help
Sincerly yours

Turbonerfs101e, it is very strange because I think driver is only for the OS, I was talking about the notebook´s POST, for me, only firmware could help me.
I already tested on another system and the problem persists.
Thanks.
Regards.

[TheShadow2012]

Originally Posted by TheShadow2012

Turbonerfs101e, it is very strange because I think driver is only for the OS, I was talking about the notebook´s POST, for me, only firmware could help me.
I already tested on another system and the problem persists.
Thanks.
Regards.

Hi Turbonerfs101e,
I updated the driver that you sent me, but anyway the problem persists.
I think is about the SSD's firmware, but mine is already up to date with the 2.4 version.
I don't have anymore to do, could I open a RMA?
Please, someboy help me.
Thanks.
Regards.

[Toasted]

Yes, you can request an RMA by clicking the link on the left.