where to mount H100 in corsair 500R

[fc0712]

Hey i need to know where the best place is to mount the h100 in my case i mounted it yesterday, right now temps look ok but i need to know if i have placed it corectly

case:500R
i got two fans connected but i could not screw them in with 4 screws because 2 screw holes were taken by the mounting of the h100.

here you can see some pictures;)

here can you see the fans
http://imgur.com/baNRh
here can you see the radiator
http://imgur.com/BjC8v
and last i wanted to ask if the cable from the rad to h100 water block is to flexed picture:
http://imgur.com/joicN

[fc0712]

i have updated the links to be correct

[taz4950]

I have the same white 500R case, but I mounted the radiator and fans reversed
in position to provide for ease of cleaning the radiators fins. I assembled my system in Feb and am using eight Noctua 120 PWM fans, five in intake mode and three in extraction. I have yet to need to clean the radiators fins due to meticulous care of all the intake fans filters. I run my system roughly 18 hrs. per day. Good luck and enjoy the H100!

[iamairdeano]

Originally Posted by fc0712

i got two fans connected but i could not screw them in with 4 screws because 2 screw holes were taken by the mounting of the h100.

what you have is fine, but all eight screws should pass through the fans, case and then into the radiator.
i usually let gravity work for me and up end the case, itll avoid droppsies and loose screws falling in wrong places..

airdeano