View Single Post
  #3  
Old 01-18-2019, 02:01 PM
CrAsHaNdBuRn413 CrAsHaNdBuRn413 is offline
Registered User
CrAsHaNdBuRn413's PC Specs
 
Join Date: Jan 2019
Posts: 3
POST ID # = 990404
CrAsHaNdBuRn413 Reputation: 10
Default

First off, thank you for the quick response.

That is what I kind of figured.

So my best bet at this point without buying anything else. Would be to stick with the stock fans on the H100i - Attach that to the commander pro, and just use the 3x front SP120 and 1x SP120 & LED's for RBG? If I went this route, would the logo still be a problem since it acts as an SP-RBG and the fans (minus the H100i stock fans) are SP-RBG fans. Or would I still need an additional hub?

Would I be able to control everything using this setup (H100i fans, 4x SP120 fans, LED's, logo, etc)? Do I need to plug anything into the MOBO? I'v been looking at these diagrams but each are slightly different.

I just don't want to plug things in and see smoke. The rest of the PC build was easy, but the fans and making everything work together with them can be a bit tricky.
Reply With Quote