The Corsair User Forums  

Go Back   The Corsair User Forums > Search Forums

Showing results 1 to 25 of 1756
Search took 0.10 seconds.
Search: Posts Made By: snapper69
Forum: Cooling 10-01-2018, 10:31 AM
Replies: 6
Views: 213
Posted By snapper69
The H110i GT definitely works with any 115*...

The H110i GT definitely works with any 115* socket, I'm using mine on an 1151 board. Not sure about the AM4 socket though.
Forum: Cases 08-01-2018, 07:48 AM
Replies: 2
Views: 247
Posted By snapper69
It's a while since I looked, but aren't there 4...

It's a while since I looked, but aren't there 4 holes in the bottom of the tray (like the one in the picture) that you can use to screw the HDD in place? Failing that, remove the bung and use screws...
Forum: Cases 07-25-2018, 06:43 AM
Replies: 2
Views: 377
Posted By snapper69
It looks to me as though you remove the tray, use...

It looks to me as though you remove the tray, use 2 or 4 short screws to fasten the SSD to the tray (from the rear of the tray) and then replace the tray, so that you can see the SSD but not the...
Forum: Cooling 07-19-2018, 07:30 AM
Replies: 24
Views: 4,112
Posted By snapper69
It can also be controlled by Link, if you don't...

It can also be controlled by Link, if you don't want to install iCue, which is, after all, a BETA release, rather than the eventual full fat, all singing and dancing version that we will eventually...
Forum: Cases 07-19-2018, 07:00 AM
Replies: 3
Views: 460
Posted By snapper69
The 900D has space for 12 HDD's and if you don't...

The 900D has space for 12 HDD's and if you don't use the 5.25 bays, you can fit more in there. It is a BIG case though.
Forum: Cooling 07-09-2018, 10:19 AM
Replies: 6
Views: 539
Posted By snapper69
Shame really, I have a Commander Mini, which I...

Shame really, I have a Commander Mini, which I have been using without a problem for quite some time, I also have a Commander Pro (still in it's box). The C mini is useful for controlling the old led...
Forum: Cooling 06-26-2018, 07:12 AM
Replies: 11
Views: 794
Posted By snapper69
I'm fairly sure that the coolant doesn't flow...

I'm fairly sure that the coolant doesn't flow through the fins, so some slight damage shouldn't matter.

You shouldn't need to run your fans that high, the fans on my 280mm rad run at 800 to 900...
Forum: Cooling 06-26-2018, 06:41 AM
Replies: 13
Views: 890
Posted By snapper69
DO NOT swap it with your supplier. You will need...

DO NOT swap it with your supplier. You will need to contact Corsair, using the "Support Ticket System" link at the top of the page (you will need to register again for that) and tell them what you...
Forum: Cases 06-26-2018, 06:31 AM
Replies: 3
Views: 385
Posted By snapper69
Interesting fact. Flat packs were first invented...

Interesting fact. Flat packs were first invented by SATAN as a cruel and unusual punishment for sinners. He later added the unintelligable instructions for the really bad sinners.
Forum: Cooling 06-21-2018, 06:43 AM
Replies: 24
Views: 931
Posted By snapper69
Reading your first post, there was no mention of...

Reading your first post, there was no mention of the SATA cable being connected. Is it?
Forum: Cooling 06-19-2018, 07:55 AM
Replies: 10
Views: 898
Posted By snapper69
What is your ambient temperature?

What is your ambient temperature?
Forum: Cooling 06-14-2018, 08:15 AM
Replies: 4
Views: 496
Posted By snapper69
Are you sure that it's an H100 and not an H100i?...

Are you sure that it's an H100 and not an H100i? The i makes a fairly large difference, with the i you get USB connection and can change the led, pump speed and fan speed, without the i, no USB...
Forum: Cooling 06-14-2018, 07:49 AM
Replies: 2
Views: 331
Posted By snapper69
I run a 6600K at 4.5Ghz with a VCore of 1.275v,...

I run a 6600K at 4.5Ghz with a VCore of 1.275v, cooled by an H110i GT and my idle temps are in the mid 20's rising to high 40's to low 50's when gaming. My pump is set to quiet and my fans spin at...
Forum: Cases 06-12-2018, 06:43 AM
Replies: 6
Views: 1,216
Posted By snapper69
The H115i Pro is definitely a 280mm cooler with 2...

The H115i Pro is definitely a 280mm cooler with 2 x 140mm fans (ML ones) so I'm at a loss to think where 240mm would come in.
Forum: iCUE Software 05-31-2018, 08:43 AM
Replies: 19
Views: 1,996
Posted By snapper69
iCue is still early access software and there is...

iCue is still early access software and there is a warning near the top of the iCue forum to read BEFORE you install it. It says:

"CORSAIR iCUE is Currently in Early Access

The CORSAIR iCUE...
Forum: Cooling 05-31-2018, 08:17 AM
Replies: 29
Views: 69,134
Posted By snapper69
This is a 10 month old thread and Red Ray is no...

This is a 10 month old thread and Red Ray is no longer with us ( as far as I know,he hasn't died, he was banned by Corsair). There was a good deal of talk, a while back, about how the Asetek coolers...
Forum: Cases 05-25-2018, 09:22 AM
Replies: 12
Views: 887
Posted By snapper69
In that case, my 900D has a serious problem....

In that case, my 900D has a serious problem. Maybe I should spend some time this weekend looking in my garage for my long unused dremel.
Forum: Cases 05-25-2018, 08:51 AM
Replies: 2
Views: 396
Posted By snapper69
I have also used the 3.5 inch to 5.25 adaptors,...

I have also used the 3.5 inch to 5.25 adaptors, but I also used a cage, made by Icy Dock

https://www.amazon.co.uk/gp/product/B00LT4CA5Y/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

which allows...
Forum: Cooling 05-16-2018, 07:40 AM
Replies: 5
Views: 569
Posted By snapper69
Doing it the way that you have is perfectly ok,...

Doing it the way that you have is perfectly ok, as long as you have enough fans exhausting air out of the case so that you have a balanced airflow and no dead areas where hot air can sit. Personally,...
Forum: Cooling 05-16-2018, 06:55 AM
Replies: 6
Views: 687
Posted By snapper69
The pump is designed to get the 12 volts that it...

The pump is designed to get the 12 volts that it needs from the CPU_Fan header, you just need to go into the Bios and ensure that the CPU_Fan header is set to provide 12V constantly (that may mean...
Forum: Cooling 05-15-2018, 07:50 AM
Replies: 6
Views: 687
Posted By snapper69
The pump should be connected to the CPU_fan...

The pump should be connected to the CPU_fan header and the fan will be ok on the CPU_opt header, you need something on the CPU_Fan header to avoid the warnings on booting.

You cannot use Link to...
Forum: Cooling 05-15-2018, 07:31 AM
Replies: 5
Views: 569
Posted By snapper69
I seem to recall that Corsair recommend using...

I seem to recall that Corsair recommend using their coolers as intake, purely because that is the way to get the coolest air through the rad, so it may well not be a typo. Under normal conditions,...
Forum: iCUE Software 05-12-2018, 07:26 AM
Replies: 4
Views: 1,349
Posted By snapper69
Try it and see. Set it to either and let it run...

Try it and see. Set it to either and let it run for a couple of days, monitoring the temps, then switch to the other setting and do the same again. If there's little or no difference, I would set it...
Forum: Cooling 05-12-2018, 07:16 AM
Replies: 21
Views: 2,586
Posted By snapper69
If you are going to do push/pull, or even if you...

If you are going to do push/pull, or even if you aren't, check the outer edge of the fan housing and you will find 2 arrows. One points around the housing and is the direction of rotation of the...
Forum: Cooling 05-12-2018, 06:58 AM
Replies: 13
Views: 839
Posted By snapper69
My fans are set to a custom frofile, where they...

My fans are set to a custom frofile, where they never go over 900rpm (almost silent) unless my coolant temp goes over 40, which it almost never does.
Showing results 1 to 25 of 1756

 
Forum Jump

All times are GMT -4. The time now is 09:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.