supertramp Posted January 24, 2014 Share Posted January 24, 2014 Hello everyone, I built a new system with a Carbide 400R 2 weeks ago. I love the case so far. But front fans a little bit noisy in my opinion and I'm considering to replace them and use them as side intakes with a fan controller. And also the front dust filter is already getting covered. So I'm wondering how to reach the front fans and the filter. Is it by removing front panel completely or? I searched for some videos and guides on the net but couldn't find anything useful. Is there an easy, safe and quick way to do this? I'm usually very talentless when we talk about fragile parts. So basically need your help folks. :o: I'd be very happy if I can get a detailed help on this. Thanks in advance Link to comment Share on other sites More sharing options...
Toasted Posted January 25, 2014 Share Posted January 25, 2014 To access the front fans, you will need to remove the front panel. There is usually a gap at the bottom of the front panel, all you need to do is pull it out. (may require some force) Link to comment Share on other sites More sharing options...
supertramp Posted January 25, 2014 Author Share Posted January 25, 2014 To access the front fans, you will need to remove the front panel. There is usually a gap at the bottom of the front panel, all you need to do is pull it out. (may require some force) Thanks a lot. So I don't need to remove the HDDs or I/O panel or something else right? Just pull the front panel out from the gap at the bottom? There used to be some screws or clips at the sides before on older cases. Well, hope I don't break anything! :P Link to comment Share on other sites More sharing options...
Toasted Posted January 26, 2014 Share Posted January 26, 2014 Found a pic on the internet, hope it helps. http://www.techpowerup.com/reviews/Corsair/Carbide_400R/images/instodd0.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.