The Corsair User Forums

The Corsair User Forums (http://www.asktheramguy.com/forums/index.php)
-   Cases (http://www.asktheramguy.com/forums/forumdisplay.php?f=189)
-   -   Obsidian 500D RGB SE - Motherboard installation (http://www.asktheramguy.com/forums/showthread.php?t=180179)

Hayena 08-10-2018 07:44 AM

Obsidian 500D RGB SE - Motherboard installation
 
Yesterday I've finally received my 500D RGB SE but during the installation of my motherboard I noticed the connectors on the back were off.

The case came with plenty of screws but the installation guide is really lacking on... well installation.

So with the case came a few rubbers which would allow me to raise the motherboard but none of the screws seem to be long enough to do this.

Can anyone help me with this? Am I missing something?

Corsair StormShadow 08-10-2018 02:31 PM

Quote:

Originally Posted by Hayena (Post 967946)
Yesterday I've finally received my 500D RGB SE but during the installation of my motherboard I noticed the connectors on the back were off.

The case came with plenty of screws but the installation guide is really lacking on... well installation.

So with the case came a few rubbers which would allow me to raise the motherboard but none of the screws seem to be long enough to do this.

Can anyone help me with this? Am I missing something?

You're going to have to be more specific, or at least provide some visual, I'm not sure what you are talking about.

Hayena 08-10-2018 04:03 PM

Sorry if I was not clear in my original post, I hope these following pictures make my issue more clear.

http://i68.tinypic.com/21nnomf.jpg
As you can see the connectors and the backplate are not aligned properly

http://i65.tinypic.com/105scr4.jpg
These are the screws and rubbers provided with the case

Krokarn 08-10-2018 04:58 PM

Quote:

Originally Posted by Hayena (Post 968007)
Sorry if I was not clear in my original post, I hope these following pictures make my issue more clear.

http://i65.tinypic.com/105scr4.jpg
These are the screws and rubbers provided with the case

Those screws and rubbers is not for the motherboard, they should be fitted in the two hdd-trays on the backside. What you can fit in the trays with those screws and rubbers do i not figured out yet.

abhiv27 11-17-2018 10:48 PM

Quote:

Originally Posted by Krokarn (Post 968009)
Those screws and rubbers is not for the motherboard, they should be fitted in the two hdd-trays on the backside. What you can fit in the trays with those screws and rubbers do i not figured out yet.

can you tell me what those screws placed at upper left corner are for ?


All times are GMT -4. The time now is 04:18 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.