The Corsair User Forums

The Corsair User Forums (http://www.asktheramguy.com/forums/index.php)
-   Cooling (http://www.asktheramguy.com/forums/forumdisplay.php?f=155)
-   -   PSA - H80i/H100i Y-connector (http://www.asktheramguy.com/forums/showthread.php?t=131129)

Fauxbeard 08-06-2014 12:41 PM

PSA - H80i/H100i Y-connector
 
1 Attachment(s)
We've received calls/tickets about an "incorrect" fan cable supplied with the H80i/H100i. The Y-splitter cable shipped with the H80i/H100i/H110i GT has two plastic tabs covering the 4-pin male connector. This is to protect the pins from being bent during shipping and to avoid any unwanted grounding/short problem if the cable is not used while connected to the pump.

http://forum.corsair.com/forums/atta...1&d=1407342996

thenosbod 08-06-2014 02:16 PM

you should make this a sticky!

wytnyt 08-06-2014 02:29 PM

Quote:

Originally Posted by thenosbod (Post 721925)
you should make this a sticky!

people would still overlook the cap,,needs to be stamped on the cover
''cover-pull to remove''

amb7247 08-25-2014 02:29 PM

I thought this as well until it dawned on me, oh, this comes off. lol.

Nichrome 09-21-2014 01:37 PM

I thought the same hahaha so dumb of us. Though I'd personally make these covers to be different colour just to make it stand out!

scharlston 09-28-2014 11:41 AM

How to plug in 2 pin fan into 4 pin y connector??
 
Hey guys. I figured out you have to take the caps off, and it might just be me being sleep deprived, but what is the proper way to plug in the stock fans that come with the h100i to the y connector? The fans have 2 pins and the y that comes with the box has 4? just stuck trying to figure it out. Thanks guys

thenosbod 09-28-2014 12:00 PM

http://www.corsair.com/en-gb/blog/20...00i-cpu-cooler

scharlston 09-28-2014 06:28 PM

lol...so I guess I need to get some more sleep. Figured it out. Thanks for your help.

nsl1 12-09-2014 10:55 PM

Glad I wasn't alone on this one.

FloorPizza 02-10-2015 11:05 AM

I had a moment of brilliance that revealed my previous moment of idiocy...The epiphany hit as I pulled the covers off the connector. "Wow, I'm smart!" I thought. "Oh, rly? A smart guy wouldn't have taken an hour to figure this out."

Maybe a little pictogram in the instructions showing that you need to remove the covers from the pins would be appropriate for us smart/dumb guys. : )

My wife laughed so hard I thought she was going to hurt herself.

russiandivxclub 04-25-2015 06:28 PM

it took me like 20 minutes to figure out that this thing is a cap that need to be removed. I mean I am genius but for some reason I didn't figure this out instantly ..... I was like well ..... this should be a male ....AHHHHHHHH HERE WE GO 4 pins :D

rccodes 06-26-2015 12:34 AM

Best Troll Ever... esp at 4am with no sleep at the end of a 6 hour build... i thought i was going to cry for a few mins til i realized, wait why are these so flimsy... would be huge to print this either on the cover or in the manual...

Extreme MODS 07-14-2015 12:31 PM

hahaha..i almost rmad the one i received...took me an hour to figure out whats what with these pins..glad it is being discussed..lotsa new pc builders who would crack up on these small things..heck i know i did..

hey wytnyt...wats up..check my thread out dudes..did some updates

wytnyt 07-16-2015 07:28 PM

Quote:

Originally Posted by Extreme MODS (Post 789421)

hey wytnyt...wats up..check my thread out dudes..did some updates

Ive had eyes on your build regularly and Im glad to see things are looking up.,anyone can pay to have sheet metal,panels,painting done by another yet call it built by them but truly doing everything yourself produces so much more satisfaction even if there are flaws.
Things are looking good,keep up the good work...;):

Buckaroo 01-24-2016 08:46 PM

Quote:

Originally Posted by wytnyt (Post 721928)
people would still overlook the cap,,needs to be stamped on the cover
''cover-pull to remove''

There should also be a "Please Do Not Eat" warning in case someone thinks it's a snack.


All times are GMT -4. The time now is 04:12 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.