Cmd32gx4m4c3000c15

[FiveInline]

Im im the process of buying new ram for my Sabertooth X99.

 

Im thinking of the Dominator 3000 Kit (32GB 4X8GB)

 

CMD32GX4M4C3000C15

 

But i want to be able to run 3200Mhz, and there is no other Dominator kit that is compatible With X99 over 3000Mhz except for the Torque kit.

 

Will i be able to OC this kit to 3200? Or is it a lottery, maybe maybe not?

[emissary42]

I'd say there is a decent chance you might reach DDR4-3200 at slightly relaxed timings and/or a bit more V. My pretty similar CMR32GX4M4C3000C15 needed around 1.39V for DDR4-3200 15-17-17.

[c-attack]

There is a 4x8GB 3200C16 kit as well as the ROG red at the same timings. Is the issue it isn't on the compatibility list? I am not sure that matters much with an established platform and a kit that is far newer than any of the Asus lists. I suppose price in your market has a say, but I might be more inclined to go with non-QVL 3200 than 3000 and squeezing a little more, although I do agree it should work.

[FiveInline]

It says Intel 100 compability not X99 on the 3200 kit.

[FiveInline]

I went with the Torque kit, mainly for the b-die chips. Black top bar ordered so i think it will look very slick :)

[c-attack]

I went with the Torque kit, mainly for the b-die chips. Black top bar ordered so i think it will look very slick :)

 

There you go. I certainly would prefer C14@3200 as well, but that torque color scheme is a bit difficult. Sounds like you have a good plan.