The Corsair User Forums

The Corsair User Forums (http://forum.corsair.com/forums/index.php)
-   iCUE Software (http://forum.corsair.com/forums/forumdisplay.php?f=280)
-   -   Unknown USB Device (Device Descriptor Request Failed) (http://forum.corsair.com/forums/showthread.php?t=186586)

Gronar 04-01-2019 09:39 PM

Unknown USB Device (Device Descriptor Request Failed)
 
Any ideas? Just noticed it tonight, not sure if it was related to the iCUE update or not.

Corsair Calico Jack 04-02-2019 03:25 PM

What product is giving you this warning specifically? If all of our devices are detected normally, it's unrelated to iCUE.

Gronar 04-02-2019 03:58 PM

Quote:

Originally Posted by Corsair Calico Jack (Post 999971)
What product is giving you this warning specifically? If all of our devices are detected normally, it's unrelated to iCUE.

It's listed under USB controllers in device manager. I unplugged and replugged my H100i Platinum AIO from the USB header this morning and noticed it went away but the error returned. Also my Void Pro Wireless headset is disconnecting/reconnecting when this occurs multiple times, 5-6 and then reconnects. Been watching device monitor all day and have actually witnessed the headset do that in it.

Glzmo 04-02-2019 04:29 PM

That's likely caused by the iCue crash bug/USB disconnect/reconnect on iCue startup with H1xxi RGB Platinum coolers. If it happens multiple times, the USB driver can crash and then you get that error. Restarting your computer should fix it until it happens again, but you'd likely want to try the workaround in my signature and see if that helps to keep it away afterwards. The more USB devices you have connected, the higher the probability will be that the driver crashes when it happens.

Also, you can try deleting the device that gives an error from devices manager and restarting your computer. It should be re-initialized and hopefully properly installed it on the next Windows Startup.

Gronar 04-02-2019 04:39 PM

Quote:

Originally Posted by Glzmo (Post 999990)
That's likely caused by the iCue crash bug/USB disconnect/reconnect on iCue startup with H1xxi RGB Platinum coolers. If it happens multiple times, the USB driver can crash and then you get that error. Restarting your computer should fix it until it happens again, but you'd likely want to try the workaround in my signature and see if that helps to keep it away afterwards. The more USB devices you have connected, the higher the probability will be that the driver crashes when it happens.

The funny thing about all this is it was operating perfectly until I updated iCUE last night to the latest rev.

Gronar 04-02-2019 10:55 PM

I used the instructions to uninstall iCUE with Revo and reinstalled it and that seems to have cleared up the Void Pro wireless disconnecting and reconnecting. All devices are running fine (K95 Plat RGB, Void Pro wireless, MM800 mousepad, H100i cooler, Dominator Platinum RGB, Commander Pro, 2 ML 120 fans and 3 LL 120 fans) but still have that defective USB device as Win 10 calls it in Device Manager. Onward to try and troubleshoot what it is and try to fix. Thanks for the advice!

Gronar 04-03-2019 07:49 AM

Quote:

Originally Posted by Gronar (Post 1000050)
I used the instructions to uninstall iCUE with Revo and reinstalled it and that seems to have cleared up the Void Pro wireless disconnecting and reconnecting. All devices are running fine (K95 Plat RGB, Void Pro wireless, MM800 mousepad, H100i cooler, Dominator Platinum RGB, Commander Pro, 2 ML 120 fans and 3 LL 120 fans) but still have that defective USB device as Win 10 calls it in Device Manager. Onward to try and troubleshoot what it is and try to fix. Thanks for the advice!

Update: I fixed the USB error in Device Manager. I simply swapped which USB header the Commander Pro and H100i connectors were going into the motherboard. Device manager has no errors/conflicts.

Corsair Calico Jack 04-03-2019 04:38 PM

Weeeeeeird windows must've registered it wrong.

Gronar 05-12-2019 10:50 PM

1 Attachment(s)
Quote:

Originally Posted by Corsair Calico Jack (Post 1000139)
Weeeeeeird windows must've registered it wrong.

Here's something even weirder: Anytime I reboot now I get the constant disconnect/reconnect sounds and it usually leads to the device descriptor error in devman. To fix this I have to totally power down for about two minutes (shut down, hit switch on PSU, unplug PSU and let sit). Then after a restart I have to run the repair option in iCUE to get it to recognize all devices and work normally again. No errors at all until I have to reboot and then go through the whole process again. Attaching logs.

Corsair Calico Jack 05-14-2019 04:08 PM

This is unrelated to iCUE at this point. The driver is just not registering correctly or it's getting blocked by something on launch or there's something wrong with the cooler's USB connection. It has to be on of those things.

Although you have a Z370...

What software version of iCUE is currently installed? This can be seen in Settings on the bottom right of the icue window.

Gronar 05-14-2019 04:53 PM

Quote:

Originally Posted by Corsair Calico Jack (Post 1004583)
This is unrelated to iCUE at this point. The driver is just not registering correctly or it's getting blocked by something on launch or there's something wrong with the cooler's USB connection. It has to be on of those things.

Although you have a Z370...

What software version of iCUE is currently installed? This can be seen in Settings on the bottom right of the icue window.

3.15.101. No, my board is an X470, should have put that in my specs.

Gronar 05-15-2019 04:30 PM

I may have fixed this but in doing so created a new problem. I'm running two copro's with the AIO. I had the copro's connected in series to one USB header on the motherboard and the AIO connected to the other. Also right next to these headers is a USB 3.1 header that I had a hub plugged into and was wondering if maybe all those together is causing too much of a power draw? (I'm not an electrical engineer so this is a SWAG at it from me.)

I totally uninstalled iCUE including registry entries, shut down and did some rewiring. Now I have each of the copro's going to the two motherboard headers and the AIO connected to the header on copro #1. I have another USB 3.1 header on the side of the board so switched that hub over to it. Booted back up, reinstalled iCUE (3.15.101), setup the fans and light strips and all is working fine, no USB disconnect sounds (except for an initial one when I launch iCUE, I don't have it set to run on startup, don't get any after it is up) and I no longer have the device descriptor error in devman, even after reboots.

Problem is now the RGB from the h100I flickers. Every 30 seconds to a minute the two fans connected to it and the actual cooler lights will flicker. Have tried repairing iCUE to no avail. So close to having it all run perfect, any ideas?

Corsair Calico Jack 05-16-2019 03:08 PM

Normally that happens when communication is interrupted. That may just be the result of all the USB's plugged in...

2 possibilities:
1. It's too much going through a single header and the communication is failing.
2. The USB bus is overloading.

Gronar 05-16-2019 04:10 PM

Quote:

Originally Posted by Corsair Calico Jack (Post 1004761)
Normally that happens when communication is interrupted. That may just be the result of all the USB's plugged in...

2 possibilities:
1. It's too much going through a single header and the communication is failing.
2. The USB bus is overloading.

Hmm, I wonder if I'm pushing the limit of my PSU? Running 600w.

Corsair Calico Jack 05-16-2019 06:22 PM

I don't really see that happen much, but I guess it's certainly possible (without me doing any math, of course).


All times are GMT -4. The time now is 09:35 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.