Roy Davies

If type 3 and type 4 pci-e cables are the same why give them different names.

Icue is just getting worse with every update, 5.8.130 is just a crash fest and the rgb lighting with my K70 lux and M65 elite mouse is no longer funny, I have Icue set to run on startup but 8 times out of ten my lighting profile wont kick in so I have to close Icue and restart it....sometimes it take several attempts, also the game intergration with The Division 2 is patchy at best, the div2 support is the only thing that has kept me using my Corsair K70 lux, I`d be happy if I could just install the keyboard and mouse drivers with out the rest of the junk.... at least I could use Msi center without out any conflicts, long gone are the days of running corsair ram, rgb fans and a Corsair aio, If Msi made a better keyboard than my K70 LUX AND M65 RGB ELITE....thats what I`1d be using. That being said....I am happy with my 2gig MP600 pro XT and my 2 gig MP600 pro nvme drives.... not to mention my Corsair HX1000i psu which I`ve had for close to 10 years.

I had the Icue crashing daily until I removed all the profiles... or so they were supposed to be removed, something else the devs cant get right.... they were still installed when i re-installed Icue, I went back to an older version after removing every thing(again) then upgraded to the latest 5.6.97 version and the crashing stopped but the rgb issue is still a thing so I`ve just disabled game integration for now, I tried with murals turned off but it didn't change anything. I have Icue set to run on startup, as well as Msi center and Lconnect

RGB lighting game integration for my K70 lux and M65 elite broken in the division 2, I dont know if murals is conflicting with the game or with Msi mystic lighting but the lights turn off when i start the game

Had to remove my Icue profiles for my K70 lux and M65rgb elite to get Icue to work

A buggy mess like the previous version.....crashes on start up, unless Corsair are going to start making motherboards and gpu`s they need to make sure there software works with everyone else's and not expect everyone else to fix there issues. So....I removed Msi center and lconnect and installed Icue 5.6 first and it still wont run 👍good job Corsair. Well at least the crash reporter works.

Another problem with Icue, Msi center on the left detects my Unify correctly....Icue on the right... does not.

Can you guys add support for Lian li fan hubs and also fix the Msi motherboard support issues. Thank you in advance...because I know you care about your customers that have used your products for over 10 years

Icue detects my Msi x570 Unify motherboard but Im wonderin if the Msi plugin and drivers are buggy, some times my Icue home screen show an Msi MEG x570 ACE, Ive been using my Unify for 2 years now and this has always been an issue

Hi, I have a Corsair K70 lux, an M65 rgb elite mouse and a Corsair VOID elite headset, Ive supported Corsair for a long time, previous products....H1ooi gt....H115i platinum( the flimsy rgb cable broke pulling the cable plug from the Commander pro I was using at the time, several different types of corsair ram kits but i switched to gskill because Corsair dont care about cl ratings, 5 m65 mice in total including 2 rgb elite( buttons always fail after 12 months), oh and I have a Corsair HX1000i psu which after 10 years i use as a spare and my current psu is a Corsair sf750 80+ platinum, is it too much to ask that Icue detects my Msi x570 Unify properly...it detects the sensors enough to show temps and fan rpm.

Hi, I have a Corsair K70 lux, an M65 rgb elite mouse and a Corsair VOID elite headset, Ive supported Corsair for a long time, previous products....H1ooi gt....H115i platinum( the flimsy rgb cable broke pulling the cable plug from the Commander pro I was using at the time, several different types of corsair ram kits but i switched to gskill because Corsair dont care about cl ratings, 5 m65 mice in total including 2 rgb elite( buttons always fail after 12 months), oh and I have a Corsair HX1000i psu which after 10 years i use as a spare and my current psu is a Corsair sf750 80+ platinum, is it too much to ask that Icue detects my Msi x570 Unify properly...it detects the sensors enough to show temps and fan rpm.

Hi, Im currently running an Msi x570 Unify which Icue detects as an MEG x570 ACE,I have my Lian li fan hub connected to an argb v5(jrainbow1) port on my Unify which has my Lian li Galahad 360 pump and 8 sl120 fans connected to that hub, I have full control of the lian li hub with Lconnect and Msi Mystic light, despite Icue detecting the rgb ports on my Unify I have 0 control of the jrainbow1 port, for most uses mystic lighting is ok but I spend most of my free time playing the division 2 which supports Icue lighting and mystic lighting, the problem is the mystic light implementation sucks and seems to be limited to 4-5 static colors of white...yellow... red... green and blue and as the Icue lighting has its own Division 2 game color profile I would like to use Icue to control my Lian li hubs leds. I found out today that the lian li leds can be controlled with a Corsair/argb(5v 3pin) adaptor cable connected to a Corsair commander which I have but no longer use no longer use but i do have the Corsair header on my motherboard, given that Corsair and Msi must have agreed the use of this header I`m assuming Icue will have full control of any rgb device connected to it despite Icue only having a list of Corsair fans and leds, as the lian li hub is also connected to a usb hub and has its own windows 11 driver my question is are there any plans to implement Lian li compatibility or is there an official Corsair approved work around.

my 3080SuprimX shows up in dashboard but not on the home page of icue, but as I have an Msi motherboard i just use Msi center`s mystic light, it has less rgb features than Icue but it does a more stable job of controlling all the rgb in my system including my Lian li galahad rgb with 6 lian li sl 120 fans and my TridentZ royal`s rgb with games that use mystic light.

Hi, Ive just upgraded to an Msi 3080SuprimX which uses 3x8 pin pci-e, along with this I`m also running a Ryzen 5800x, 32gig TridentZ royals(4x8), 3 nvme drives and 2 sata drives and a lian li aio with 6 fans, while playing the division 2 my system peaks at 609watts but runs an average of 500-550watts, in a couple of weeks i will be moving my system back to my lian li mini with a Corsair sf 750 watt, I will also be adding an additional 3 fans for a total of nine fans, I suspect i will be dropping yet another corsair product from my system as 750watt is the max for corsairs sf line up and yet other companies like Silverstone and Seasonic do 850 and 1000watts sff psu`s , I`d rather spend another £250 on a larger psu and run my system efficiently with a good overhead than near the limit with poor efficiency

Hi guys, I had planned to move my system to a Lian li mini snow edition that i have fitted with an Corsair sf750 watts psu but due to my new Lian Li Galahad 360 aio i bought there isnt enough room to fit the Galahad and my Msi X570 unify board(chunky vrm heatsinks) so i postponed the switch until i got an itx board, I had already tested my system in the new case which had an rtx 3070 and a 240mm corsair aio in it and the system ran fine but Ive just upgraded to an rtx 3080 SuprimX, now...according to some reviews on youtube.... the 750watt sfx should be more than enough , I have no problem buying a more powerful sfx psu but corsair seem to top out at 750watts, is anyone running a 750 watt psu with an rtx3080, Im only running an Amd ryzen 5800x and wont be switching until the next gen mature. The specs for the sf750 state 4 pci-e ports and that it is capable of running dual gpu is this correct.