Mark-McG

Thanks for this, I got an NZXT hub and thats solved it. No idea why my commander wasnt passing it through but its fixed now and I have some more usb headroom for the future :) Thanks for your help!

Sorry I dont think I explained myself too well, So I have one of those cables and I understand that the usb type A would go to my motherboard IO... But what would I plug the mini usb into? The node core doesnt have a port on it, the cable comes straight out the plastic box?

Thanks for the reply! I have just double and triple checked that its aligned and pushed in so all good on that front. Unfortunatley my board (Mini DTX) only has one usb header which is being taken by the commander pro. How would I do the second test as the USB cable coming out of the node core only has an end to connect to a header, not sure how I would connect to a cable?

Hi all, I have just completed a custom water-cooling system using Hydro X parts and 6 QL120 RGB Fans connected to a commander pro and a lighting node core Currently the setup is: Commander Pro is powering the fans and pump. (working well) LED1 on Commander has the Hydro X Pump, CPU & GFX card connection via daisy chain (working well) LED2 on Commander has two LED strips connected via Daisy chain (working well) Lighting node is connected to SATA power and the USB connector into the commander pro. (Not working) The fans do light up and the lights switch off when removed from the node core but the node core does not show in iCue and therefore I cant change the lighting. They are stuck on rainbow. Can anyone help, maybe I'm missing something silly? Thanks, Mark

So I tried swapping them round, then swapping back and now neither of them have the RGB working!! :( No idea what's going on here

Hi all, First time PC builder and poster, My build has gone well so far with everything working as I expected except one thing. On my Corsair H100i Cooler I have installed it correctly (I think) but one of the fans isnt showing any RGB. Both fans are connected to the H100i using the provided connections, both spin and one of them lights up correctly. However the other doesn't light up... It is detected in iCUE and shows the LEDs as addressable but they never switch on. Attached is a picture of the connectors as they are now, albeit not a good one but hopefully it gives an idea. So after all that my question is - Is there an issue with the fan or how I have set it up? https://imgur.com/LDYVUWc