Jump to content

Zephyiris

Members
  • Posts

    3
  • Joined

Reputation

10 Good
  1. Hi! I pretty much have the same setup as you, what is the vertical GPU bracket that you used that allowed the installation of fans on the bottom? I got the Lian Li one but that blocks the fans on the bottom for me to use as intakes.
  2. Ah thanks for that info! I dont have the exact information on hand since I'm at work but this is what I saw: My current loop: Corsair XC7 CPU Block + Corsair XG7 GPU Block + 2x Corsair XR5 360mm Rads + XD5 Corsair Pump/Res 1- I was looking at hwinfo and then hwmonitor afterwards. 2- Not sure what my vCore was but on CPU-Z it was showing ~1.3v I left everything in stock. 3- The coolant temp based on the iCue software was ~25-28C
  3. I think I have the same issue. When I set my pump profile to be the Hydro X Pump settings, I think either the pump is moving very slow or not at all since the flow indicator on the GPU is not moving. Instead, I had to add my own profile to adjust the RPM and had to set it to 90% and above in order to move the flow meter. I'm not sure if this is how it's supposed to work since it's my first time doing custom water cooling. My 3900x is also hitting 90C when I run realbench stress test :/ Seems a bit high for a custom loop with 2 rads.
×
×
  • Create New...