Jump to content

nam.uk

Members
  • Posts

    122
  • Joined

Reputation

12 Good

About nam.uk

  • Birthday 05/04/1970
  1. The elite rgb Aio comes with a usb 4 pin plug that's got 3 wires for the mb and the colours are not even related absolute daft for install as there is no instruction on ordination why not just stick to the original usb plug and make it simple for all, i wont mind corsairs own install guide shows a proper usb header supplied
  2. gone back too the last version it just messes with hardware lighting
  3. Like the murals but i had too complete uninstall icue and reinstall as the hardware lighting would not let me change it back to what i had it as, the asus motherboard integration is laggy to show up on home interface also, even after a clean install, another reason i did a clean install. might go back to previous version if nothing changes
  4. every time icue is loaded everything that's detected is random on screen cant that be locked were you put it or auto arrange it , imagine same on widows desktop was like that, first thing i do on a reinstall is select auto arranged, only a small issue but it does my nut in lol
  5. will this fix the rgb mem red triangle issue? I'm on the latest mem firmware
  6. This was added later on https://help.corsair.com/hc/en-us/articles/360041797351-Set-up-ASUS-Motherboard-integration-in-iCUE I don’t run the software and still get red triangle
  7. I’m not running any of the asus software just bios mb lights on and I get the red triangle random , like above why can’t they coexist
  8. hi i have this Aio https://www.corsair.com/uk/en/Categories/Products/Liquid-Cooling/Hydro-Series™-PRO-RGB-Liquid-CPU-Coolers/p/CW-9060032-WW it says the cooler is compatible with LGA1200 socket , so which stand offs do i use? , i take it ill have to use the mb bracket supplied as i never used it on x79 platform. also i do have a H100i v2 is that compatible with Lga 1200 only asking as that would be a nice backup
  9. It does say on the site the h115i pro is compatible Cooling Socket Support Intel 1200, 1150, 1151, 1155, 1156, 1366, 2011, 2066 AMD AM4, AM3, AM2, sTRX4*, sTR4* *Purchase bracket CW-8960054 on CORSAIR webstore for compatibility with AMD socket sTR4/sTRX4 https://www.corsair.com/uk/en/Categories/Products/Liquid-Cooling/Hydro-Series™-PRO-RGB-Liquid-CPU-Coolers/p/CW-9060032-WW#tab-tech-specs ive been looking myself
  10. just simple dust that you cant see can cause that i had that years ago on ram slots , unplugged hovered slots it fixed it just don't use the brush attachment as it causes static or just use caned air but some can spit out water so watch that, extreme use electric contact cleaner
  11. yea you can see the copper like you say a choke The psu tester just says it’s ok lol, thing is I monitor the fan ect and I’ve only seen the fan kick in once and that was when it was in its 30s psu sites around 43-48c and fan is not on, so I always thought the fan kicks in at 50c, at load all works fine it’s random idol I get shutdowns, it’s not like Corsairs psus this as I’ve had them for years , except the ax860i that this replaced unless it’s related too icue psus
  12. Had sudden shutdowns and restart for a while , thought it was ram as that was swapped out , everything was ok for weeks then it all started again so did a clean install , so I thought take out the HX1000i and refit my old HX850 I got in 2010 , had that much problems I was demoralised to say the least , two days in no shutdown ect, so thought I’d have a look at the HX1000i but not strip down as it’s under warranty, well I seen this , just to confirm does that look melted ? Also looks like a relay
  13. Air flow pros utter class and had 2 on a Quad Dominator GT kit but after long testing it seems the mem kit has developed a fault, gutted but hopefully i can ram the kit and get replacement, but i doubt i can run the pros again as that feature connector was only on a few GT mem kits, last time i seen this idea was the corsair ddr1 kits that i owned
  14. i have been having black screen and 100% fan screen random for a while on the ftw2, was ether the paste or hx1000i yet its not old but the 1080ftw2 is connected with a pig tail and supplied but in manual it says the psu is supplied with (4) 8 pin 6x2 and been using the pig tail since day one but there is (3) 8 pin 6x2, was messing today and just touching the plug i replicated the same issue, rattle on pins? so going to change to two dedicated leads soon as , thing is ive done the EVGA ftw2 bios 11gbs update so reviews will not reflect power draw
  15. LL fans not working in far cry 5 with this version no issue on the last 3.25.60 install, also the SDK dir is missing
×
×
  • Create New...