Jump to content
Corsair Logo Corsair Logo
Corsair Community
CORSAIR COMMUNITY Survey, we want to hear your feedback!

Steiner-KD

Members
 View Profile  See their activity

  • Posts

    56

  • Joined

  • Last visited

  • Days Won

    1

Steiner-KD last won the day on September 28 2022

Steiner-KD had the most liked content!

Reputation

11 Good

About Steiner-KD

  • Birthday August 30

Converted

  • Occupation
    Retired (Illness)
  1. Steiner-KD
  2. Steiner-KD
  3. Steiner-KD
    Thank you, I'm quite happy with it. I have 45mm thick front and top, 25mm rear wall. The way I mount the gfx card I have about ~320mm+ from the rear of the case to the nearest fitting.(in -ort of res). If you make your own bushings between the rad bracket and pump holder you could probably buy another 5mm. If you have a 45mm in the front you will NOT be able to have a 45mm rad against the side wall, the fit between the side wall and front rad is VERY tight. with a 25mm rad+25mm fans. If you only run 2 rads (front and top) you can have fans against the side wall no issues. Yes, the fans are standard 25mm ones and go on the outside of the rad holder, no issues there, plenty space. As you can see there's plenty space for quite thick fans in the front. If you have any further questions please let me know and I will try to help.
  4. Steiner-KD
    And Graphics card is here and waterblocked (Sapphire Radeon RX7900 XTX Nitro+, Alphacool block)
  5. Steiner-KD
    Getting closer, should get gfx card and water block for it next week. Trying to figure out the Leakshield tech.
  6. Steiner-KD
    Making small steps of progress again finally. Graphics card (Sapphire RX7900XTX Nitro+) with waterblock from AlphaCool should arrive next week. 2 gen 4 2TB NVMe installed to be raided for storage and another Gen 4 2TB NVMe (will be replaced with gen 5 when available) for boot. Soo many bloody cables to manage and connect, and I suck at it. up against the PSU is a Hubby 7 USB 2 hub and the other is a Octo Fan/RGB controller. Started with the tubing too
  7. Steiner-KD
    I'm going for a horizontal mount, so unfortunately will conflict. But still plenty time before any 7900xtx cards go on sale, maybe there will be custom PCBs that are shorter, or maybe have to go with a non-EK waterblock. Also, even if I switch the front radiator, I think two 30mm 360's and one 45mm 360 should be cooling enough, just sucks with the extra expenditure.
  8. Steiner-KD
    Seems I might have to switch toa slim radiator in the front. The water block from EK for the reference Radeon RX 7900 XTX is 307mm long, and the clearance from PCIe fingers to the tips of my res fittings is 300mm, switching to a 15mm thinner rad might just rescue that.
  9. Steiner-KD
    Meh, EKWB having supply issues and my AM5 waterblock for the CPU won't be delivered until Nov 22.
  10. Steiner-KD
    Well, RAM and CPU should be on it's way here now and also ordered the CPU block from EKWB. Will have to wait a bit more for gfx card and water block for that.
  11. Steiner-KD
    Oh LoL, took me a while. That's a cheap ass gfx card I meant to throw into a computer I'm building to run pfSense on.
  12. Steiner-KD
    I will, haven't ordered the block yet though, will this week. Waiting to see if EK will release a full block or if I'm to go with justa CPU block.
  13. Steiner-KD
    More parts trickling in
  14. Steiner-KD
    At a standstill currently, I've got a lot of the water cooling parts in as well as done most cable management. The issue is it's a AMD Zen4 build so still waiting for the CPU, motherboard and RAM to arrive so I can actually put it in my system. So at the moment it basically looks like my last picture. My motherboard should arrive Monday or Tuesday and getting the CPU and RAM sent to me from the US (I'm in Sweden) so will take aprox 2 more weeks. Then I'm also waiting for the PCIe 5 NVMes to be out together with new RDNA graphics cards, so likely I won't be done until mid December.
  15. Steiner-KD
    The front and top rads are 45mm ones, 30mm + fans on the side. With the front and top rads in the slots closest to the front you have roughly 10mm between the front of the side rad and the side of the front rad. 45's is absolutely fine. From the bottom of the top fans to the bottom of the front bracket it's 440mm (but I also have 7mm decouplers/shrouds between the top fans and top rad so potentially 447mm clear for the front rad to fit in. Might be tight with 2 420's but one 420 and one 360 should be absolutely fine.
×
×
  • Create New...