Jump to content

emissary42

Members
  • Posts

    1,108
  • Joined

  • Days Won

    5

emissary42 last won the day on April 5 2016

emissary42 had the most liked content!

Reputation

122 Excellent

Converted

  • Interests
    Overclocking, photography & hardware in general...

Converted

  • Occupation
    Freelancer

Converted

  • Homepage
    http://www.hardwareluxx.de

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Very small voltage bumps usually don't hurt and won't damage the memory itself. In fact many IC types can take up to 1.5V no problem and some even more, but there also are exceptions. Others barely scale up to 1.4V and might even show negative scaling from higher voltages. So there is no universal recommendation for all IC types/SKUs. The scaling of certain timings is similar. Not for all ICs both tRCD and tRP scale with Vdimm, it is actually pretty rare among for DDR4. So sometimes 3600 16-18-18 can be completely out of the question at any given (even an unsafe) voltage, but for example 16-19-19 or 16-20-16 might work instead. Here is a link to one of the frequently recommended memory overclocking guides, that covers most of the basics and also some more advanced topics: https://github.com/integralfx/MemTestHelper/blob/master/DDR4%20OC%20Guide.md
  2. Noch als Ergänzung dazu: Dies gilt so natürlich nur bei einem Neukauf. Beim Gebrauchtkauf ist dein Vertragspartner der Verkäufer (Vorbesitzer). Edit: Wollte eigentlich meinen Beitrag bearbeiten, jedoch wurde mir dazu keine Option angezeigt. Bearbeiten eines Beitrags ist offenbar nur noch für kurze Zeit möglich?
  3. Hier wollte sicher niemand irgendeine unlautere Absicht unterstellen? Die Garantiebestimmungen sind wie gesagt öffentlich einsehbar und sind so auch durchaus Branchen-üblich. Deine gesetzlichen Gewährleistungsansprüche (2 Jahre ab Kaufdatum für Neuware) kannst du wie schon erklärt nur gegenüber deinem Vertragspartner, also dem Händler und in diesem Fall offenbar Alternate, geltend machen.
  4. Depends on IC type (version number). Some ICs take voltage really well, others have lower tolerance. If and how much tRCD/tRP scales with voltage if at all, also varies with IC type. There is more than just a couple that won't be able to run tRCD/tRP 18 at 3600 with any amount of voltage. However if you have settle with tRCD/tRP 19 that is not a big deal really. You can extract plenty of performance out of tweaking subtimings, to more than make up for it.
  5. Timings sehen in Ordnung aus und kannst du ruhig so lassen, wenn alles stabil ist. Die Domis sollten im Betrieb etwas kühler bleiben als die Vengeance RGB Pro, einfach weil der massivere Heatspreader die Abwärme der ICs etwas besser abführen kann. muvo hatte hier im Forum auch mal zwei Kits gegeneinander getestet und konnte dies bestätigen, sein Test ist auch noch angepinnt. Welches Kit dir optisch mehr zusagt, solltest du besser selbst entscheiden. Das ist wohl eine sehr subjektive Frage ;)
  6. Durchaus möglich. Ob/wie viel besser der 4000er Bin aber tatsächlich ist, kann ich dir nicht sagen. Um das zu beurteilen fehlen schlicht mehr belegte OC-Ergebnisse von anderen Usern.
  7. CMT32GX4M4C3600C18W oder CMW32GX4M4C3600C18W könnten 3800+ CL16 durchaus mit manuellem OC erreichen. Je nachdem welche DRAM Chips verbaut sind, kann das allerdings einiges an Spannung erfordern.
  8. Check the compatibility as stated on the product page and in the memory finder, usually the z-models have improved AMD compatibility.
  9. Laufen beide Module einzeln im Steckplatz A2 oder ist dieser generell ohne Funktion?
  10. CPU-Z Memory Tab gibt die tatsächliche Speicherfrequenz sehr zuverlässig aus, dir sollten dort 1600 MHz angezeigt werden. Das entspricht auf Grund der Double Data Rate DDR4-3200. Als schneller Benchmark eignet sich der Aida64 Memory Benchmark oder winsat mem.
  11. DOCP will probably not work with your kit, but it does not hurt to try. You might end up having to reduce the memory ratio a bit, to get it working though.
  12. Just asking someone with that kit, won't give you a definite answer. Somebody could have gotten one type of IC and another one a different type and both would not necessarily have to be what you would get, since there is just too many options to build specs like that from.
  13. In der Regel stellt sich diese Frage nicht, oder nur bei der Entscheidung für oder gegen eine bestimmte Plattform. So besitzen alle Mainstream Plattformen zur Zeit einen Dual Channel Memory Controller. Egal ob zwei oder vier Module eingesetzt werden, es handelt sich um eine Dual Channel Konfiguration. Für Quad Channel müsste man statt dessen zu einer HEDT Plattform greifen. Effektiv ermöglichen zwei zusätzliche Kanäle mit mindestens vier Modulen höhere Speicherbandbreiten, haben also jedoch Ihren Preis.
  14. The answer is probably the same the thread right below yours: https://forum.corsair.com/v3/showpost.php?p=1068265&postcount=2
×
×
  • Create New...