Jump to content

CrazyAngel1990

Members
  • Posts

    23
  • Joined

Reputation

10 Good
  1. I was looking at the specifications of the strip and it was specified that it was GRB and not RGB, so before buying it I wanted to be sure that it was okay
  2. Ah ok, I misunderstood, but eventually I use the cables that I already have and I change them so I do not change much where I take the power For the tip for Italy I would spend a lot of disputation with even the risk of customs :-( I was looking though that the strips I found have the WS2812b controller but they are not RGB GRBs, are they okay?
  3. Ok, so you say that I can power 90 LEDs using a single channel without causing damage? In the end if only the LPN dies and it does not damage me anymore then it is not a problem to recall as much as I have another one :-) Unfortunately as I said I'm Italian so I can not take the cables already made as those who linked me the ebay shop :-(
  4. Right, so now I try, but in theory it should not change anything if I get in touch with the sata instead of the LNP. The important thing is that I understood how to connect everything then I do some tests. So the led limit is always 96 has not been increased?
  5. THB what would it be? I used the sata to be sure of the amps, because it would be more convenient to use the LPN
  6. is this correct? we connect 3M of strip which is 90 LEDs I will never thank you enough for all the help you are giving me
  7. Here I am, I have not had much time lately So let's see if I understand the connections well. The Data connects it in the red of the LED strip connector that calls Input And then the + and the - I take it from a molex to get enough A I made a scheme to understand better
  8. Ok, I understand that for the 90 LEDs I want to connect I have to set 6 LL fans and that the power I have to take from a sata or molex. What I miss is how to make the connections to the strip
  9. Why can not I take it from a sata or molex? But the links I said would be fine?
  10. I'm beginning to understand. So if I want to put a 6-meter strip that has 90led and the total consumption of 18watt I absorb 3.6A that I could take from a sata or molex? Then the red and white strip cable is to give it power instead the green and red comdani how do I connect them to the LNP?
  11. So this is LPN These are the LED strip cables How should I make the connections that I did not understand anything?: Thinking: I would like to cover 3m of desk, I can also make two strips of 1.5m to not be overloaded, but unfortunately I did not understand how I should do exactly
  12. I do not absolutely blame corsair for the closed system, even after it has released icue has surpassed the other producers to unimaginable levels given the comfort and the ecosystem. it's just a shame to have so much potential but to be limited, I speak from the power of two completely corsair stations and would return to buy a thousand more times, I was only sorry for the big limit. I am willing to try, I cable with links and everything, but I struggle to understand how to connect the wires, then I know that exaggerating with the A breakers and circuitry break, but if I could also put the strip on writing was too beautiful. Thank you so much again for all the help you are giving me
  13. What a mess, corsair had fun doing a closed system :-( If it became too impossible I took two kits of strips only then I can use only 6 so even there it is not convenient. Given the unified system and the software done so well it is really a pity that you can not easily connect non-proprietary strips. Can I feed them externally and use only the LNP to control the colors? The limit of 2.1A is for sinoglo connector sin or in total of the two?
  14. For this I ask you, to be helped because they are able to make the welds connections but here I did not understand how to connect everything. So I understand now how the thing of the maximum controllable LED works. Ok so ineria configuring as LL fans I can do it. Now I have a commander pro, with a connected 3x ML120 PRO and 4 corsair strips, so if I connect an additional LNP, can I control 90LED if I set up as LL fans?
×
×
  • Create New...