Finaldeath

Being able to set my keyboard and mouse to disable lighting after say 30 minutes of not using them (with mouse sensitivity threshold in case the desk shakes from the dryer or truck driving by) would be pretty nice to have. At the moment i use the brightness key to swap profile to one that is exactly the same just with no lighting at all but having the ability to turn them off with inactivity would be great. Biggest issue with the profile method is the dpi light is either always on or always off since dpi settings are stupidly not affected by profiles.

You can sort of do this by rebinding the brightness key to change profiles and make copies of said profile with different brightness settings and tweak the bind in each profile so that it cycles between the number of brightnesses you want. For example make a 100% brightness profile link to 0% profile then the 0% profile link to a 50% and that profile link to 100% profile, or alternatively you can make all the profiles into a folder and have the button simply cycle to the next profile in the folder. The biggest pain with this though is having to change every profile when you change any of the other settings to keep them all in sync. I was looking for the same thing to have the brightness button on my strafe turn off the leds on my void and scimitar so made 2 profiles, 1 with leds on and another exact copy but with leds off, only issue is i can't figure out a way to have it also turn off the scimitar dpi light since the dpi setting is completely separate from the profile. This should really be a built in feature though instead of the stupid profile jumping bs. I was shocked when i got my strafe and the brightness key change the brightness on all my corsair devices which seems like a logical default thing for that key to do.

Make all preset options available in advanced. There are a few things i would like to combine like void mic and playback visualization along with having things like caps and numlock color toggles and mic mute light, but when going into advanced to do the toggles i can no longer use the void mic and playback visualizations effects. On top of making the void mic and playback visualizations available in advanced it would be cool to have more options with them like being able to set certain zones that the visualization effect happens. Possibly have better volume thresholds for the light effect so it doesn't flood the entire keyboard all the time. As well as an extra 1-2 color options to have more of a gradient for the visualization. For example i would like void playback to span across from f1 to f12 depending on how loud the sound being played is and void mic to span 1 thru = depending on how loud i am talking. Another cool option would be able to set keyboard colors based on void headset battery level. So say the headset has full battery it could light up 0-9 on the numpad but depending on the percentage of the battery it could turn one or more of those lights off like at 50% it would only light 0-5, at 9% and lower it would only light up 0. With this it could also have several color choices depending on the battery level so from 0 to 25% it could be red and 26-50% it could be orange, 51-75% yellow and 76-100% be green. The battery levels lights would be very handy since the only way i know of to see battery level is in global options in cue, but having it right there on the keyboard would be great to know when i should plug the headset in. Edit: More options for lighting start/stop conditions would be nice too, specifically numlock on/off and capslock on/off. Can currently do this by having the effect trigger when pressed and turn off when pressed again but it can get inverted easily like when using profile switches among other things. Other nice conditions to have are mic muted/unmuted and volume muted/unmuted. Headset buttons being bindable to keyboard like mouse buttons can would be great as well. Things like EQ changer (both cycle and ability to individual EQ profile) and mic mute toggle. Separate dpi modes for different profiles, i made a separate profile to disable all lights on all my devices when i press the brightness button on my Strafe but there is no way to have it turn off the dpi light on my Scimitar, i tried setting a second dpi mode that is the same but with a black light but when switching back to the profile with lighting on it stays on the same dpi mode on both profiles, i then tried disabling all dpi modes except the one with the light on my lights on profile then when i went to my lights off profile the dpi settings were the same on that one so i couldn't disable all but the black light dpi color setting making it seemingly impossible to do what i want to do which is simply toggle on/off ALL lights when i press the Strafe's led key. Only option i apparently have is have the dpi light always on, always off or have to manually change the dpi setting every night which makes going through the trouble of making a lights off profile and tying it to my keyboards lighting key pointless. None of the options we/I have are acceptable imo, so would either like the ability to have cue forcibly turn the dpi light off for a specific profile (and on for another) or have dpi settings completely separate between profiles. Would also appreciate the ability to change the time it takes for the Void Headset to auto shutoff, 10 minutes is far too short so being able to set it at different times like say 30 minutes would be great.