therandomest

It seems to be recommended to not mix different fan types on an RGB hub. Will this cause issues and will I be able to control them properly?

Hello, I'm trying to set up a Corsair RGB system and wanted to check and see if this would work. First, what I'm trying to control: - 8 LL fans on two quad rads - 2 ML case fans - 2 LED strips. These are not Corsair brand (link here: https://www.amazon.com/gp/product/B07KFLC814/) but I've taken off their 3-pin connector and replaced it with one that is compatible with Corsair (Molex 50-57-9403). My plan was to have one Lightning Node that controlled it all. From one Lightning port, a Y-splitter cable (3-pin, 2-wire) going to two RGB hubs that separately controlled my case fans and my rad fans. The 8 LL fans would require two Y-splitter 4-pin cables to get them into the 6 ports. Then use the other Lightning port to control the LED strips. Would this work? Image below: My main concern is the split cable coming from the Lightning node and the off-brand LED strips. Any help is much appreciated thanks!