Wiechu

Can the GND cable from FAN HUB go to in and out of SP110E like shown on the picture? http://sztum.net/sp2/wp-content/uploads/2018/08/Conection2.jpg Or it will be better if i take DATA and GND from HUB, connect the both to controller OUT and then power the SP110E from some where else like SATA to DC plug so i hase power supplied separatly, just like MozaPrime did with his SP103E build. And lastly can the SP110E controller be conected to 12V plug instead of 5V if it issuplied separatly from HUB anyway (SP110E can withstand up to 24V)? It won;t hurt HUB that is 5V, right?

Shuld check if it works without GND conected to the output or it will harm my HUB and i shuld go straight to wireing everything up before checking?

"Corsair" on the picture is the fan hub. So I will need to conect Ground from FAN HUB to both: DC plug and GND output on SP110E, just like on updated diagram? http://sztum.net/sp2/wp-content/uploads/2018/08/Conection2.jpg

Hi! After reading almost whole post i have decided to upgrade my 6x Corsair SP120 RGB FAN system. I want to be sure that i won't break anything so I am asking you guys first just to not blow up my PC. After seeing @MozaPrime video of his HD120 working on SP103E controller i purchased SP110E controller that is capable of controling UCS1903 LEDs of my SP120. I have bought some cables to conect everything without soldiering. Here is what i have: http://sztum.net/sp2/wp-content/uploads/2018/08/Items.jpg I want to be certain that i connect everything right so i made this sketch of Corsair contreoller pinout. Is that correct order? http://sztum.net/sp2/wp-content/uploads/2018/08/Pinout.jpg Do i understand it correctly? FAN hub of SP120 and HD120 is the same but their remotes are different? I will conect everything as shown on the photoe below. http://sztum.net/sp2/wp-content/uploads/2018/08/Conection.jpg I will set my LEDs in SP110E controller as 1 strip of 6 LEDs so i think that it will work just fine. If it will work i hope i have helped somebody who was thinking about getting HD120 RGB or SP120 RGB to work but don;t know a thing about programing Arduino (just like me).