The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Keyboards and Mice

Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 06-15-2012, 10:28 PM
phsion phsion is offline
Registered User
Join Date: Jun 2012
Posts: 2
POST ID # = 584851
phsion Reputation: 10
Default New K90 Fail after Firmware Update

Hi All, hoping to get some help for this keyboard.
I just bought this thing today, played around with it for a bit on my laptop, without installing drivers, and it worked fine. Once I got it home, I hooked it up to my tower, and again, it seemed to work fine. Then, I went online and downloaded the only drivers listed (Beta 2.12). I installed the drivers, updated the firmware, and then the keyboard stopped working completely (No lights, no nothing). Both firmware and driver installer gave success messages, but the keyboard kinda flickered for a bit, then died. I've tried it three different USB ports on my tower, and two on my laptop. I turned off the USB selective suspend on both machines, I've killed all processes, uninstalled everything, tested, reinstalled, disabled/enabled drivers, all the while unplugging and plugging back in the keyboard, restarting the computer, but nothing seems to work. The keyboard software utility seems to indicate that nothing is connected, and the firmware utility gives me "Cannot open USB device, please reinstall driver!". When uninstalling and reinstalling the keyboard's driver, if the keyboard is not plugged in, the driver install program gives an error, however the installer appears to work fine once the keyboard is plugged in. When looking at the Device Manager, there are two HID Keyboard Devices in the Keyboards section, the k90 and my backup keyboard I assume. The bad device is under Universal Serial Bus controllers, listed as "USB Composite Device", but flagged with a Yellow icon, and the message "This Device could not start". The driver is a generic from Microsoft. Trying to do a manual update from Update Driver also fails, saying something like "There are no drivers compatible with that device in that folder" (doesn't matter if I choose x64 or x86). Auto driver update just says that the MS generic is the best driver for this device. Uninstalling the device from the manager forces windows to try and install the driver again, once the keyboard is plugged back in, but I end up with the same generic driver. Sorry for the wall of text, but my backup keyboard is an old Saitek Cyborg I'd rather throw out my window than use, so I'm desperate.

Basic system specs: 4 Month old custom job.
Windows 7 Professional 64
MSI P67A-G45
Core i5-2500k
16GB Corsair DDR3
Radeon HD 5770

P.S. Also today, I bought a Logitech G9x mouse. It's working fine, but who knows, maybe there is a conflict, but I have disabled everything Logitech related without any luck.
This really seems like the firmware update mangled the keyboard to me, but hopefully someone can really tell me whats going on.

Thanks all.

Edit: I would love to try pushing an old firmware onto this thing, but can't seem to find any way to do that, or anything to download...any ideas?

Last edited by phsion; 06-15-2012 at 10:30 PM. Reason: Additional Note.
Reply With Quote


firmware update, k90, k90 bad driver

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 12:36 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.