Force 3 120 GB Boot Problem (Boot Device Led)

[luizfelipemn]

Hello

I'm having problems with the SSD Force 3 120GB

I will explain what is happening.

My PC hangs at the logo boot screen at startup, need to press reset to start. The keyboard does not work.

On the motherboard there is the option to choose which hard drives will be the main, if I put the main HDD, install Windows on the SSD, starts normally, the boot sector of Windows was in HD and the system on the SSD. When you start your PC, search the HDD and boot it goes to the SSD. Right?

But if I put the SSD as the main, install Windows, the PC hangs at the logo screen setup, you need to hit reset to start Windows.

The SSD is firnware 1.3.3 (The serial number is 120101491 - CSSD-F120GB3-BK)
I updated the BIOS (1602)
Drivers all installed correctly

Controllers
JMicron JMB36X Controller SATA2
Marvell 91xx SATA 6G Controller

SSD problem or Motherboard?

Please help me! SSD is 1 month of use.

Sorry if my English is wrong, do not speak very well, I used Google translator to help, I'm from Brazil. Thank you!

[Toasted]

Plug it into the Intel SATA II Port and see if it freezes on the Starting Windows screen

[luizfelipemn]

I used the SATAII and the same thing happens.

[Toasted]

-Run a ATTO benchmark and post a screenshot.

[luizfelipemn]

[Toasted]

Have you tried a different SATA cable and plugged it into the Intel P55 SATA Port?
Does the HD L.E.D stay solid?

[luizfelipemn]

I switched cables, used different ports, the same error occurs. It does not happen when the PC is plugged in, only when it is unplugged from the power for a long period, 3h for example.

[Toasted]

It might be the PSU, Try a different SATA power connector that comes out from the Power Supply.