Search the Community
Showing results for tags 'voltage'.
-
When playing battelfield 1 it freezes for about 15 or 20 minutes looking at hwinfo on the 12v rail goes down to 11.6 and using a benchmark it can go down to 11.5 No load remains at 12,096 using a browser at 12,024 and using some non-demanding game 11,952 Using a tester gives this result https://pasteboard.co/JNGGVwN.jpg What causes those freezes Psu corsair ax 750 gold
-
Hello there! I hope im right here, if not, please help me by leading me into the right direction. Now, to the Problem: On Monday i upgraded from some Crucial RAM, a Z370 Board and some stock Cooler, to Vengeance RBG Pro RAM, a Z390 Board and a Noctua cooler. Since then, my LL120 Fans (which i only have 3 of, so far) have been Blinking in various colors. Now, i didnt take this as a serious issue since i just pretty much set up a new system but i then noticed that one of the fans stopped spinning every now and then, just to get back up again. Because the Noctua Fan is basically right infront of it, i quickly did a benchmark, thinking it might be stopped by the massive airflow of the Noctua Fan, luckily that didnt seem to be the case. Now, when i look into iCue, i can see that Voltage on 12v, 5v and 3,3v drops to 0 or change (for example, 12v at 5v). The Fans disappear every now and then and the color i set for the fans have barely any impact. I tried swapping some cables at the Commander, swap Fan1 and Fan3, both RGB and fan controller The RAM works fine though, im having no issues there. The Corsair logo and the I/O Panel were blinking in different colors too, but it seems like i fixed that, somehow. I would really appreciate any help, since im at the point where i have no idea anymore. Thanks!
-
Hi all, it's about time for a fresh general guide for using XMP/manually overclocking your memory so we've worked with Linus to put this quick video together. [ame] [/ame]
-
- clockspeed
- ddr3
-
(and 7 more)
Tagged with:
-
Hi all! so ever since i got my 500D with the copro (two months ago), icue says my 3.3v is 1.61v(+-). What does it mean? Should i be worried? Thanks!