8GB ram run fine on a 790i

Olonese · #1 08-14-2009, 01:49 PM

Hi guys , my first post.
I share my settings after my 8GB Corsair ram has passed 6 time memtest86+ 21.11 ,about 7 hours long without errors.

The two twin have a different revision number but this didn't affected the result.
In Bios: Linked and Synk. P1 and P2 Auto
memory timing 9-11-11-30-1T 6-41-12-16-25-7.8-88 (these are Optimal)
Vram 1.90 VcpuFSB 1.30 VSPP 1.40 Vcpu Auto VMCP Auto

Vram is higher than Corsair specs.

ask for more information at experts.

Do you think Vram is too high ? If lower, pc boot and seems stable but doesn't pass Memtest86+ without errors.
Bye O.

RAM GUY · #2 08-14-2009, 02:45 PM

No just don't go over 2.0 Volts!

Olonese · #3 10-06-2009, 04:23 AM

I propose again the thread 'cause I'm using new settings working fine in overclock too.
In Bios same settings except freq. cpu 400x10 4GHz and ram timings:
8-8-8-22-1T(2T)------5-34-10(12)-15-21-7.8-74
Temperature rise but I can handle it with my box feeded by AC
http://forums.slizone.com/index.php?...dpost&p=329954

RAM GUY · #4 10-06-2009, 06:03 PM

As long as its stable you should be fine!

Olonese · #5 10-07-2009, 02:16 AM

I made only a pass with memtest+. No errors but I know you should test ram much longer. I use these settings only for gaming.
Temperature is lower if I use timings 9 and same cpu freq. 4 GHz 400x10.
I have set Vcpu Auto in Bios, using Everest trial I have seen with timing 9 Vcpu remain 1.29 - 1.30. With timings 8 Vcpu rises to 1.39.
Bye O.

RAM GUY · #6 10-07-2009, 04:32 PM

If you system is stable in Windows or the O.S. you are using then you should be fine.