|
|
 |

08-13-2009, 10:09 AM
|
|
Registered User
|
|
Join Date: Aug 2009
Posts: 9
POST ID # = 411755
|
|
Bad RAM
Hi there,
I have built this system and all seemed fine until i upgraded my GFX card and ran some benchmarks (3D Mark 06 and Vantage) and scored rediculously low 14000, which is what i get with my old card (9800GTX) so after messing in bios and other settings etc i bit the bullet and sent my mobo, cpu and video card back to retailer which they have tested and have found no fault and seeing as i did not send my ram they seem to think thats where the problem is .
my computer does not crash, lockup or BSOD the only thing i notice is that it runs a little slow and i know its not a slow system :)
do you think the tech guy is correct ?
|

08-13-2009, 02:18 PM
|
 |
Corsair Product Guru
|
|
Join Date: Apr 2001
Location: Fremont, CA
Posts: 115,964
POST ID # = 411799
|
|
The memory is not going to have any effect on a Video bench mark, are you having a memory problem or just because the test score is low in 3D Mark?
|

08-13-2009, 04:48 PM
|
|
Registered User
|
|
Join Date: Aug 2009
Posts: 9
POST ID # = 411823
|
|
mainly because all my other components have now been tested barr my hdd and ram and i doubt its the hdd as its relativly new and i have also tried x2 9800 GTX's in SLI and get the same results as i would with just 1
and yes because i have really low benchmark scores :) , i have done some googling and everyone who has similar systems to mine are scoring in the region of 19000 i however only get 14000 , with a 295 GTX , 9800gtx and 2 9800 gtx's in sli
i have x4 1Gb sticks of the dominator if this is any help
thankyou for your reply
Last edited by Wired; 08-13-2009 at 05:23 PM.
Reason: merged posts; updated profile with new information...
|

08-13-2009, 07:09 PM
|
 |
Corsair Product Guru
|
|
Join Date: Apr 2001
Location: Fremont, CA
Posts: 115,964
POST ID # = 411843
|
|
Quote:
mainly because all my other components have now been tested barr my hdd and ram and i doubt its the hdd as its relativly new and i have also tried x2 9800 GTX's in SLI and get the same results as i would with just 1
and yes because i have really low benchmark scores :) , i have done some googling and everyone who has similar systems to mine are scoring in the region of 19000 i however only get 14000 , with a 295 GTX , 9800gtx and 2 9800 gtx's in sli
i have x4 1Gb sticks of the dominator if this is any help
|
A: I would suggest checking the Nvidia forums about that as I remember that was a known issue with these cards. In additon, if you install other memory does the results change?
|

08-14-2009, 02:17 AM
|
|
Registered User
|
|
Join Date: Aug 2009
Posts: 9
POST ID # = 411876
|
|
i think i have 2 gig of xms stuff around here somewhere, but will have to wait for my bits to come back, i initially thought it was my mobo cause i have the same problem if i put any gfx card in but will deffo try the other ram
|

08-14-2009, 11:58 AM
|
 |
Corsair Product Guru
|
|
Join Date: Apr 2001
Location: Fremont, CA
Posts: 115,964
POST ID # = 411921
|
|
NP Please let me know how you make out!
|

08-14-2009, 12:05 PM
|
 |
Corsair Tech Mktg
|
|
Join Date: Oct 2002
Location: Atlanta,GA, USA.
Posts: 10,262
POST ID # = 411929
|
|
Quote:
Originally Posted by Deserteagle|ni
Hi there,
I have built this system and all seemed fine until i upgraded my GFX card and ran some benchmarks (3D Mark 06 and Vantage) and scored rediculously low 14000, which is what i get with my old card (9800GTX)
|
Have you used a driver cleaning tool to COMPLETELY remove the old Nvidia driver? Moving from 1 series of card and driver to a new series can sometimes cause issues.
|

08-14-2009, 02:50 PM
|
|
Registered User
|
|
Join Date: Aug 2009
Posts: 9
POST ID # = 411978
|
|
Quote:
Originally Posted by specmike
Have you used a driver cleaning tool to COMPLETELY remove the old Nvidia driver? Moving from 1 series of card and driver to a new series can sometimes cause issues.
|
yes ive use driver sweeper and im now ready to try voodoo or beat the ****** out of it with its own manual :)
|

08-18-2009, 01:56 PM
|
 |
Corsair Product Guru
|
|
Join Date: Apr 2001
Location: Fremont, CA
Posts: 115,964
POST ID # = 412399
|
|
If you have another HDD you might try a fresh install of the O.S. to test if its a driver issue from the previous card.
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Rate This Thread |
Linear Mode
|
|
The Corsair Support Forums
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|