The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Enthusiasts Section > System Builds, Modding, Custom Components, and Picture Gallery

Reply
 
Thread Tools Display Modes
  #1  
Old 04-10-2013, 02:58 AM
TBash TBash is offline
Registered User
 
Join Date: Apr 2013
Posts: 5
POST ID # = 645959
TBash Reputation: 10
Default The Bash Box/Corsair 600t

Ever since i bought this case i dreamed of modding it but one thing lead to another(a game came out and i had to be palying it) So modding got pushed to the back of my priorities,Well after moving and getting a girlfriend i realized i have not been gaming nearly as much but i was still itching to Mod my case so The Bash Box was born.

I have done quite a lot to get to the point im at so here goes nothing.




Drilled out the rivets for the 5.25 drive cage as i have no need for a dvd drive and plan on mounting my fan controller and card reader somewhere else . DUN DUN DUN


I cut out enough room so the fan controller wont hit i was just using the dvd drive as a guide.


Out with the old. A lot of dremmeling and filing and finally it will fit.


In with the new. All i have to do is find a way to affix both of them permanently.


This is a simple switch mod i made to control the bitfenix fans .


And here is the state of things as they are right now. I plan on having LED's around the entire rim of the front bezel and where you can see the two 200mm fans i will have a 400mm radiator , I still am on the fence about if im going to have a 240 or 360 radiator in the top of the case.

Also something you cant see is i have a logisys remote start that i mounted to the back of the case normally it would sit in a PCI slot but i did not want it sticking out there.

This case will be liquid cooled at some point but right now im strictly sticking to modding.
Reply With Quote


Did you find this post helpful? Yes | No
  #2  
Old 04-19-2013, 05:42 AM
TBash TBash is offline
Registered User
 
Join Date: Apr 2013
Posts: 5
POST ID # = 647975
TBash Reputation: 10
Default

In the process of updating this post i am waiting on a couple order such as a 400mm radiator and some other odds and ends to make my super top secret reservoir, Hopefully within the next couple days i will be adding some pictures or a video update.
Reply With Quote


Did you find this post helpful? Yes | No
  #3  
Old 07-24-2013, 02:58 AM
TBash TBash is offline
Registered User
 
Join Date: Apr 2013
Posts: 5
POST ID # = 666469
TBash Reputation: 10
Default

Sorry guys i have been working on this so heres a couple more pictures and a link to my youtube account where i have been video documenting it.

http://www.youtube.com/watch?v=-7BylA2XLBA

http://www.youtube.com/watch?v=dxL2Rrf58OQ





I apologize for the video quality better quality videos will be forthcoming.

Im waiting on the Maximus 6 Formula to be released i am leaning towards that board for this build. Also i am waiting on a clear side panel from MNPCTECH.com should be here in 3 weeks so yeah that is the state of things so far.
Reply With Quote


Did you find this post helpful? Yes | No
  #4  
Old 09-02-2013, 01:33 AM
TBash TBash is offline
Registered User
 
Join Date: Apr 2013
Posts: 5
POST ID # = 672558
TBash Reputation: 10
Default

So i had a bit of a catastrophic failure i managed to destroy the entire front panel of my corsair but in the mean time i have managed to get a new reservoir made up(after having dropped the last one) and so far things seem to be going alright .




Up next comes leak testing which i am probably going to create one of those pond pump bucket and in line water filter systems for the sheer convenience and just to clean out everything.
Reply With Quote


Did you find this post helpful? Yes | No
  #5  
Old 01-04-2014, 12:44 PM
lghtng2 lghtng2 is offline
Registered User
lghtng2's PC Specs
 
Join Date: Jan 2014
Location: IL
Posts: 4
POST ID # = 690876
lghtng2 Reputation: 10
Default Need 5.25 bay/ cage

Do you still have the 5.25 bay cage and would you be willing to sell it? I need one as I have gone a different direction in my build and cut mine already.
Please message me either way.

Thanks,
lghtng2
Reply With Quote


Did you find this post helpful? Yes | No
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:20 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.