|
|
 |
|
08-12-2012, 11:15 AM
|
|
Registered User
|
|
Join Date: Jun 2012
Location: Florida
Posts: 16
POST ID # = 595992
|
|
Quote:
Originally Posted by GTXJackBauer
Question Ninja....Your HD temp there is coming from your Raid? Combined or picking the hotest one of them both or coolest? very curious and wondering how you came to conclusion that it was your 1TB HDs in Raid with that temp and not your other Raid HDs (Iam sure they all have built in sensors but wondering) I myself have Raid0 for the OS and 2 storage drives and can't seem to get temps for the Raid ones knowing all 4 of my drives have sensors built in them and the storage drives were the only ones showing temps. 2x Veloci-raptors in Raid0 (OS) and 2x 1.5 TB Caviar Black (Storage)
|
Actually I am just using Temp Probes placed in the midst of the drives to get an approximate idea of the drive temps. The actual drive temps are about 12 degrees higher or so.
I don't think the link software can detect drive temps once they are put in a RAID array.
I have a hardware RAID array for the 4 2TB drives and I can use a program that comes with that RAID card to show individual drives temps for those 4 drives. The probe I placed in that location shows about 12 degrees lower than what the drives actually are.
I use the info from the probes, however, to control the drive fans, notifications, and automatic shutdown in my custom profile (taking into account the temp difference).
|
08-12-2012, 11:36 AM
|
|
Registered User
|
|
Join Date: Jul 2012
Posts: 22
POST ID # = 595995
|
|
Quote:
Originally Posted by Ninjaman1
A little more feedback for Beta v2.0.16:
A few days ago I sat down to my PC and noticed one of the radiator fans was running slower than the other 3.
I restarted the Link software and all fans adjusted to the same.
No further problems until this morning. I had two radiator fans alike and low and two fans alike and high. Again, I restarted the software and all 4 fans adjusted to the same.
I was getting ready to post about it when I heard one of my fans take off very fast. It's early but I didn't see on the software which one it was. I shut down my PC completely.
When I rebooted the fast fan was still running fast until I started the Link software. Then it slowly came down to the rest. It was one of the radiator fans.
I leave my PC on 24/7. The 4 radiator fans are stock Corsair radiator fans and plugged in to an H100. The PC had been on several days straight when this happened.
Hopefully whatever causes this situation can be looked at and fixes put in an upcoming release of software.
I haven't had any other issues. |
Also I hope I have the same problem in a future software fix
|
09-10-2012, 04:55 PM
|
 |
Corsair Product Guru
|
|
Join Date: Apr 2001
Location: Fremont, CA
Posts: 116,514
POST ID # = 601792
|
|
Can you try and move the Corsair Link to another USB port?
|
09-10-2012, 10:08 PM
|
|
Registered User
|
|
Join Date: Jul 2011
Posts: 114
POST ID # = 601866
|
|
Quote:
Originally Posted by RAM GUY
Can you try and move the Corsair Link to another USB port?
|
What's the status of the next version of Corsair Link 2 software? Can you at least confirm that you're working on it?
|
09-11-2012, 04:59 AM
|
|
Registered User
|
|
Join Date: Mar 2012
Posts: 16
POST ID # = 601886
|
|
Quote:
Originally Posted by RAM GUY
Can you try and move the Corsair Link to another USB port?
|
Yes, i have plugged it into another usb but nothing, still the same thing =(.
|
09-11-2012, 06:23 AM
|
|
Registered User
|
|
Join Date: Apr 2011
Location: Australia
Posts: 7,416
POST ID # = 601896
|
|
Unplug and reconnect the molex and LINK connector on the Cooling Node. See if it helps.
|
09-11-2012, 10:09 AM
|
|
Registered User
|
|
Join Date: Mar 2012
Posts: 16
POST ID # = 601929
|
|
Thx Toasted, but i cant test it because now the Comander Link is completly dead ¿?. It does not even turn on the green led. It does not start any fan connected to the Cooling node...
http://dl.dropbox.com/u/612496/1.png
|
09-12-2012, 03:14 AM
|
|
Registered User
|
|
Join Date: Apr 2011
Location: Australia
Posts: 7,416
POST ID # = 602065
|
|
Request an RMA to replace the whole Corsair LINK Kit.
|
09-12-2012, 11:59 AM
|
|
Registered User
|
|
Join Date: Mar 2012
Posts: 16
POST ID # = 602172
|
|
I have made a RMA request. Thx for your help Toasted.
|
01-01-2013, 02:47 PM
|
|
Registered User
|
|
Join Date: Dec 2012
Posts: 5
POST ID # = 622844
|
|
im using the latest version 2.2.0 and my cpu temperature reading is the double of the real temp, the hdds temperature readings is 70ºC and 130ºC for the other one and my psu is always at 38-39ºC when the room temp is 20ºC so its 28 delta temp which is a lot
any help? thanks
|
01-02-2013, 05:28 AM
|
|
Registered User
|
|
Join Date: Apr 2011
Location: Australia
Posts: 7,416
POST ID # = 622917
|
|
The CPU temp. Displayed in the dashboard is an average of the individual cores. The HD temps are read from the S.M.A.R.T. Values. The number you see is not the temp. It's the S.M.A.R.T. Value which is a known bug.
Have you tried reinstalling the dashboard to see if it resolves itself?
Latest BIOS and drivers?
Have you tried running it as admin?
|
01-03-2013, 01:25 PM
|
|
Registered User
|
|
Join Date: Dec 2012
Posts: 5
POST ID # = 623251
|
|
i have tried everything you said and nothing works...
i even uninstalled the 2.2.0 version and intalled erlier versions and update their respective firmware and then install the latest versions and nothing changed ...
thank you very much for your reply
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Rate This Thread |
 Linear Mode
|
|
 The Corsair Support Forums |
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
