The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Solid State Drives (SSD) > SSD Firmware Update

Closed Thread
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 06-07-2012, 12:52 PM
Yellowbeard's Avatar
Yellowbeard Yellowbeard is offline
Corsair Tech Mktg
 
Join Date: Oct 2002
Location: Atlanta,GA, USA.
Posts: 11,051
POST ID # = 583251
Yellowbeard Reputation: 42
Send a message via AIM to Yellowbeard
Default Corsair Accelerator Firmware Update 5.02

Here is the Accelerator 5.02 firmware update. Please read the following before you attempt to update your firmware.



IMPORTANT NOTES BEFORE BEGINNING YOUR UPDATE

If you are stable and do not have issues, we suggest that you do not flash your firmware.

This update is intended to not be destructive. However, we strongly urge that you back up any important data before beginning this procedure.

Be sure to download the correct update file for your drive. Many complaints we have seen were the result of downloading the wrong file for your drive.

This update has been validated for use with Windows 7. It has not been validated with Windows Vista and Windows XP however it may work with these OS's. Users are encouraged to update the drives with Windows 7 when possible.

This update tool is intended to be run with the drive controller in AHCI mode. If your drive controller is not AHCI enabled and your update fails, you will need to change it to AHCI mode and also enable AHCI in your OS registry. Here is page with a guide for ENABLING AHCI.

If you have issues updating using the Microsoft AHCI driver, you may need to update using the latest driver from your drive controller manufacturer. The reverse is also true. If you have issues updating using the latest drivers from your controller manufacturer, we suggest you try the latest MS AHCI driver.

Our latest testing is only with Intel and AMD drive controllers. The update may not work with 3rd party drive controllers. The update will not work on a controller that is in RAID mode. This applies to SATA2 and SATA3 controllers.

DO NOT at any time power off your system during this procedure.
This may “brick” your drive. After your update if you still have issues, we strongly recommend the following steps:


1. Complete clearing of the BIOS. This is a good idea after any firmware flash of any device.

2. Secure erase the SSD. For some users, cloning of the drive works, for others it does not. This may be dependent upon the cloning tool used.

3. A clean installation of the OS if you experience instability after a BIOS clearing and secure erase.

UPDATE YOUR BIOS. As always for users with issues, we recommend that you update your motherboard/notebook to the most recent BIOS before attempting to flash your firmware. This may or may not resolve your issue but it is an excellent first step. Quite a few boards/notebooks have been given SSD specific updates over the past few months.

Ignore any terms in the firmware file name relating to Micron, Intel, etc. This has no bearing on the upgrade. You need only match the SIGNATURE as noted in the .PDF file.

Be sure to download the correct version for your drive. We have had people complaining that our files are wrong only to find that they downloaded the wrong file.

Sandforce Update Tool and .PDF Instructions

Accelerator 5.02 Firmwares

__________________
Follow me on Twitter: XMSYELLOWBEARD

Make friends on Facebook: XMSYELLOWBEARD

Last edited by Yellowbeard; 06-07-2012 at 12:59 PM.
  #2  
Old 06-07-2012, 02:14 PM
Yellowbeard's Avatar
Yellowbeard Yellowbeard is offline
Corsair Tech Mktg
 
Join Date: Oct 2002
Location: Atlanta,GA, USA.
Posts: 11,051
POST ID # = 583274
Yellowbeard Reputation: 42
Send a message via AIM to Yellowbeard
Default

Change log

Attached Images
File Type: jpg 502 Change Log.JPG (24.8 KB, 101237 views)
__________________
Follow me on Twitter: XMSYELLOWBEARD

Make friends on Facebook: XMSYELLOWBEARD

Last edited by Yellowbeard; 06-18-2012 at 12:28 PM.
Closed Thread

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.