Jump to content
Corsair Community

Type 4 cable to power HDD


ury

Recommended Posts

Hi,

I'm trying to connect multiple SATA HDDs to my system. I have only Type 4 SATA power cables available for me HX620W PSU, but the hard drives won't power up. When I connect the same HDDs to the 5-pin SATA power cable (just for testing) everything works.

Any idea?

Thanks,

Ury

Link to comment
Share on other sites

Type 4 cables are not compatible with the HX620w the only cable that has the HX620 listed is dicontinued... you might try a type 3 cable but if that doesnt work you are left with trying to source a used cable or repin the PSU connector to match one of the original cables.
Link to comment
Share on other sites

Thank you for the response. I got "loads" of Type 4 SATA power cables, so it's strange they're no supported, but apparently thus is the case.

I don't have any spare Type 3 cables, but I'll figure it out (probably SATA to IDE)

Link to comment
Share on other sites

on ebay molex splitters are cheap and they have molex to 2, 3 and 4 sata for every occasion

 

sata cables are low cost as well, in lots of colors too

 

Yeah ... ever seen one of those melt? I have. More than once.

 

Molex to multiple SATA is particularly dangerous.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...