Shinobi1369 Posted March 16, 2019 Share Posted March 16, 2019 Pretty much what the title says. I have read through the forums and checked youtube for a solution and none of the fixes work. I have plugged in the Lighting Pro Node into two different USB headers on my mobo and it does not see the Lighting pro node which is connected to the corsair fan hub that came with my case (Corsair 570X). I doubled checked the SATA connection (no molex) and the lighting pro node connection to the fan hub. All fans are spinning and showing the default rainbow color. Link 4 sees the fans in the monitor section, but it does not see the light pro node. Icue doesn't detect anything. I disabled fast boot in windows and in the bios as well. XCHI is enabled. I am requesting help on the MSI forums as well under the motherboard section. I updated the bios on my mobo as well. Still no joy on getting the USB headers(s) to see the lighting pro node. I even checked in the BIOS where you can mouse over all parts of the motherboard to see what is connected. When I mouse over the headers, just says that nothing is plugged in. Any thoughts or ideas? Appreciate the help! Link to comment Share on other sites More sharing options...
interruptingcow Posted March 16, 2019 Share Posted March 16, 2019 I just installed the H100i Pro and have the same issue. In my device manager, it sees under Universal System Bus Devices H100i Platinum, but ICue is not picking it up. Cannot see the Corsair item under USB as mentioned under Cooling FAQ in forums. Link to comment Share on other sites More sharing options...
NightRider Posted March 21, 2019 Share Posted March 21, 2019 Hi, same problem here. My mother board is Asus Z170 pro gaming. The Corsair Lighting Pro Node, only is detected when i reset them, but, afther i tunner off my PC, Pro Node is not detected again, and i have to do reset. Link to comment Share on other sites More sharing options...
NightRider Posted March 21, 2019 Share Posted March 21, 2019 Hi guys, I Fix the issue in my Lighting node pro. My lighting node pro, after i shutting down my PC, stop to work, and i have to removed the supply connector and usb to work again. So, after a few hours lost, connecting and disconnect cables, i decide isolate the both 2 Red wired on the USB connector, and works! Everything works now. I hop this can help. Regards. Link to comment Share on other sites More sharing options...
ciup Posted May 17, 2020 Share Posted May 17, 2020 Another trick is to connect the LNP with a miniusb cable to usb type c behind the motherboard...works fine! ;) Link to comment Share on other sites More sharing options...
zartl10 Posted January 24, 2021 Share Posted January 24, 2021 (edited) Hi guys, I Fix the issue in my Lighting node pro. My lighting node pro, after i shutting down my PC, stop to work, and i have to removed the supply connector and usb to work again. So, after a few hours lost, connecting and disconnect cables, i decide isolate the both 2 Red wired on the USB connector, and works! Everything works now. I hop this can help. Regards. Plugging in the LNP to the external connectors behind the pc case didn't work for me, but this did. I can't thank you enough. Edit: Yes. I created an account on this forum, not because the LNP is my first corsair product, but because I wanted to thank NightRider. Edited January 24, 2021 by zartl10 Forgot to add information Link to comment Share on other sites More sharing options...
Vincent_MY Posted September 21, 2021 Share Posted September 21, 2021 (edited) Thank you so much to NightRider, been searching for few days look from different forum everywhere. None of the solution works for me until i see your post here (So happy) I am a Z170 Pro gaming/Aura Mobo's user, lately I just bought the QL fans series, i followed your steps to isolate both red wire. Amazingly, it works! Previously i have update my Bios, install and re-install Icue ( > 10 times), remove USB driver, uninstall Aura, uninstall Logitech Gaming software, went to Bios set up USB to legacy mode or Auto mode and many many (not the main points here to share details) Finally I can start to study what ICUE can do for me instead of looking for solution regarding to Corsair Fan's lighting off after reboot. And it is very ignoring and I have to unplug/replug the cable to enable the lighting (now no longer needed ... : D) Thank you again Night Rider, special create an Account to share to the ppl who have this issue in future, so that they no need to repeat what we have done. Edited September 21, 2021 by Vincent_MY Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now