Rob AC Posted January 28, 2012 Share Posted January 28, 2012 The following was done on a Corsair K90 Keyboard, but this can also be done on the K60 as well as any other Cherry MX (Red, Black, Brown, Blue etc.) Computer keyboards. Note: According to Forum rules we are not allowed to link to and discuss competitors’ products. So just do a search for “O-Ring Dampeners” and “Colored Keys for Cherry MX” keyboards. EDIT FROM YELLOWBEARD: Feel free to post links to the O-ring suppliers and custom key suppliers. As Wired noted below, they are not direct competitors and we would love to see the sources you guys use. Who'da thunk it, modded keyboards??? ::pirate:: [Link added for O-Ring & Custom Keycaps:] http://www.wasdkeyboards.com/index.php/products/keyboard-accessories-2/cherry-mx-rubber-switch-dampeners.html http://www.wasdkeyboards.com/index.php/ Also be careful what replacement keys you buy because they might not fit. (The blue space bar replacement I ordered was a few millimeter too small and would not fit the Corsair keyboard. But all the others fit perfectly.) ------------------------------------------------------------------------------------------------------------------------------------- Getting used to the key press of the Cherry Red MX on the K90 took about a week or so. But the “clacking” sound of the keyboard as I bottomed out on almost every key press was very annoying. So I did a search for “O-Ring Dampeners,” for the Computer Keyboard. The O-Rings basically soften the key press and prevent bottoming out as well as getting rid of that clacking sound. I chose 40A Durometer o-rings. The higher the rating is the harder and non-cushioning they are. So anything 60A and above would be getting pretty hard. I also wanted to color code the keys to my liking. I was not able to find colored backlit key cap replacements for the K90. However the ones I did compromise on turned out pretty well. http://i3.photobucket.com/albums/y73/Nutzrus/K90%20Keyboard/40AO-Ringsb.jpg O-Ring Dampener Install: The procedure was very simple. Use a couple strong paper clips or two pieces of string/cord, hook the ends of the keycaps and pull straight up. I got a $6 key puller to make things easier. The O-rings came in a pack of 125pc. Turn the keycaps upside down and then just roll the O-rings onto the stalk of the keys themselves. I pushed the o-rings all the way down. (I found leaving them half way gave a very slight bit more of a sound suppression and lighter feel- it depends on your personal preference.) Reseat the keycaps firmly over the Cherry MX keys, applying even pressure for the larger keys, and that’s it. It’s is a bit time consuming, but worth it. Colored Keys: I am still on the hunt for backlit colored keycaps. Why colored keys? Well this is a personal preference for me. I wanted to make my keyboard “my own.” I wanted to color code the most important keys. (The WASD keys will be getting the color change once the keys arrive. I chose Blue, but after getting the first set in the mail, I really like the White.) I chose to get the writing Laser etched and used a 10 point Lucida Sans Font. I used Bold on the Dammit & Enter keycaps and used normal on the Shift, Alt, Ctrl, Tab, Caps Lock. [uPDATE Feb. 15th 2012: WASD keycaps arrived and installed. New pics taken and thread updated.] I took a pic with 100% back-lighting on and even at 33% the keys showed up pretty well in the dark. The only one that did not show up as well was my Red Dammit !!! key. :biggrin: I might just drill a couple tiny holes in the key to let the blue led shine through. (The pic is a bit dark, the red actually does show up when the 33% backlighting is on.) http://i3.photobucket.com/albums/y73/Nutzrus/K90%20Keyboard/K90Pic2a.jpg http://i3.photobucket.com/albums/y73/Nutzrus/K90%20Keyboard/K90Pic1b.jpg http://i3.photobucket.com/albums/y73/Nutzrus/K90%20Keyboard/K90Pic2b-1.jpg Feel: There is no more clacking sound. What a relief! The feel is now almost like a rubber dome type key- but not quite. The Cherry MX keys are still “springy” and responsive. The feel is still pure mechanical. The lightning quick key response is still there after doing this modification. The keys no longer bottom out. The o-rings act as a cushion and I find my typing is just as quick and fast. The same goes for playing games. The K90 now feels like a brand new keyboard. At first I actually missed the “clacking” sound since I had spent a week or so getting used to it. But after a few minutes of happy typing I would never go back to a Mechanical Keyboard without these 40A Durometer O-Rings. Additional Thoughts: I would also like colored keys for the Macro G keys on the left side of the K90 to help remember what macro is what. Especially for game play. For now I’ll just use a label printer with different colored labels and paste them on once I program in all my regular short cuts such as music player, calculator etc. The other non Cherry MX keys such as the ESC and Delete keys as well as some of the F keys would look nice color coded too. Here is what the keyboard will look like once I get everything done: http://i3.photobucket.com/albums/y73/Nutzrus/K90%20Keyboard/MyK90KeyboardFinal.jpg Any questions let me know. Rob Link to comment Share on other sites More sharing options...
Wired Posted January 28, 2012 Share Posted January 28, 2012 Feel free to post the O-ring link and where to get the keys. Neither directly compete with Corsair. Link to comment Share on other sites More sharing options...
stratosrally Posted January 28, 2012 Share Posted January 28, 2012 Looks great! I hope no-one minds me posting some links to help get the ball rolling for those that want to customize their keyboards. O-rings: http://www.wasdkeyboards.com/index.php/products/keyboard-accessories-2/cherry-mx-rubber-switch-dampeners.html That site also has custom keys available: http://www.wasdkeyboards.com/index.php/products/individual-custom-keycaps.html Another vendor for custom keys (site sells key dampeners similar to O-rings as well): http://elitekeyboards.com/products.php?sub=access,cherrymxkeys The above site carries some incredibly entertaining individual keys from time to time but seems to not currently be listing these (made by the Clack Factory): http://elitekeyboards.com/suppdata/images/cf_oct_slide.jpg Clack Factory's site is under contruction, so I'm not sure when they'll make more - but they often are traded for hundreds of dollars.... They've made clear and tinted keycaps, some of which are 3D molded shapes. There are many people that collect custom keycaps - and many of them are Cherry MX, meaning that most of them will work on the Corsair keyboards. Link to comment Share on other sites More sharing options...
Yellowbeard Posted January 28, 2012 Share Posted January 28, 2012 Sticky thread for now, this is really nice stuff. I like the look of the custom key colors. Who knows, I may get a pack of O rings and add those to my set up. I'll link this page on Facebook one day next week also ::pirate:: Link to comment Share on other sites More sharing options...
stratosrally Posted January 29, 2012 Share Posted January 29, 2012 http://www.keyboardlover.com/img/keycaps/clackfactory/DSC_0008.JPG http://i4.photobucket.com/albums/y146/eddie84/OCN/Mech%20keyboard%20club/key%20caps/DSC05807.jpg http://i89.photobucket.com/albums/k221/undarken/random/5757694682_cbf5a878bb_z.jpg http://i89.photobucket.com/albums/k221/undarken/random/5428586474_2f697b3d9b_z.jpg Link to comment Share on other sites More sharing options...
jongalt26 Posted January 30, 2012 Share Posted January 30, 2012 This just goes to show that Ripster is the uncontested #1 keyboard expert in the WORLD ! :bigeyes: Link to comment Share on other sites More sharing options...
Yellowbeard Posted January 30, 2012 Share Posted January 30, 2012 ::pirate:: Featured on fb today ::pirate:: Link to comment Share on other sites More sharing options...
Rob AC Posted January 30, 2012 Author Share Posted January 30, 2012 I think I found a manufacturer that will do backlit keycaps: http://keycapsdirect.com/index.php ------------------------------------- My wife gave me the eyeroll and laugh of disbelief when she saw what I was doing :biggrin: I have to admit this keyboard modifying is pretty addictive. I am now contemplating other mods. I might even break out the art brushes and do some dabbling on the aluminum. I really dig the ingenuity of some of these keyboard cap designers. As a joke I might order the following set of over sized Letter Keycaps and then replace my wife's keys.... heh. http://www.datacal.com/p-838-kinderboard-large-key-large-print-color-coded-keyboard.aspx http://www.datacal.com/images/Product/medium/838.jpg Link to comment Share on other sites More sharing options...
Boombox Posted February 1, 2012 Share Posted February 1, 2012 I ordered them o-rings early last week and still waiting for them to make their way though the big pond :sigh!: Really looking toward the change tho as this noise is getting on my nerves.... a little :laughing: Link to comment Share on other sites More sharing options...
reaper1626863066 Posted February 1, 2012 Share Posted February 1, 2012 http://i4.photobucket.com/albums/y146/eddie84/OCN/Mech%20keyboard%20club/key%20caps/DSC05807.jpg Hey that's my pic. You didn't even bother to rehost the pic. lol Link to comment Share on other sites More sharing options...
stratosrally Posted February 2, 2012 Share Posted February 2, 2012 PM'd an apology and offer to fix it for you, didn't mean to offend! Link to comment Share on other sites More sharing options...
reaper1626863066 Posted February 2, 2012 Share Posted February 2, 2012 ^ No worries. At least you didn't crop out the watermark and post it as your own. :p: Some forums are worse since they do that. Link to comment Share on other sites More sharing options...
Yellowbeard Posted February 2, 2012 Share Posted February 2, 2012 LOL....a key shaped like a grenade to replace my "G" key in BF3 would be cool looking. Link to comment Share on other sites More sharing options...
Boombox Posted February 3, 2012 Share Posted February 3, 2012 ^^^ These mods only apply for the mechanical keys, sadly the G keys aren't :p: Link to comment Share on other sites More sharing options...
Wired Posted February 3, 2012 Share Posted February 3, 2012 Boombox, he means the LETTER G, not G1..G18, The letter G key in BF3 throws grenades. Link to comment Share on other sites More sharing options...
reaper1626863066 Posted February 3, 2012 Share Posted February 3, 2012 You guys know that some of the keycaps posted above can fetch more than $100 just for a single key. It's mind blowing when you think about it. :eek: Link to comment Share on other sites More sharing options...
Rob AC Posted February 3, 2012 Author Share Posted February 3, 2012 You guys know that some of the keycaps posted above can fetch more than $100 just for a single key. It's mind blowing when you think about it. :eek: I think I saw a post on the Darth Vader one, priced at $150. Better be careful Lucas doesn't get wind of this! Link to comment Share on other sites More sharing options...
Boombox Posted February 4, 2012 Share Posted February 4, 2012 Boombox, he means the LETTER G, not G1..G18, The letter G key in BF3 throws grenades. "What do i know about diamonds, I'm a boxing promoter." :o: Link to comment Share on other sites More sharing options...
Mikuni Posted February 6, 2012 Share Posted February 6, 2012 Awesome find, I'll be getting the K90 soon, these dampeners look like a great addition :) Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 15, 2012 Corsair Employee Share Posted March 15, 2012 Please post some pictures if anyone does some custom keys! Link to comment Share on other sites More sharing options...
Superhans Posted April 5, 2012 Share Posted April 5, 2012 Soon I'll have one key from every colour on the middle of the board, purely so I can see which colours looks good with the back-lighting etc. Will post pics when I get them. Are there any special keys (like spacebar) which require some sort of trick to remove them, or do they come off like any other key? Link to comment Share on other sites More sharing options...
Rob AC Posted April 13, 2012 Author Share Posted April 13, 2012 Just pull straight up and they will come off. You can even pop a few off now and put them back on before your replacement keys arrive. And yes, everyone please post pics of your personal layout when you are done. Link to comment Share on other sites More sharing options...
Superhans Posted April 23, 2012 Share Posted April 23, 2012 I ordered one key of every colour first, just to see what colours went well with the backlight etc (pics below). I'll try and make a proper layout soon. I did have a question though... on the big keys like spacebar, enter, right shift (uk layout) there are stabiliser switches on either side of the main red switch. Do the keys from WASD come with these "slots" so the pins on wither side of the main switch can be fitted, or can you get on OK without them? Here is a pic to illustrate what I'm on about: http://dl.dropbox.com/u/3727020/IMG_20120423_191821.jpg Other pics of random keys: http://dl.dropbox.com/u/3727020/SAM_0251.JPG http://dl.dropbox.com/u/3727020/SAM_0252.JPG http://dl.dropbox.com/u/3727020/SAM_0254.JPG http://dl.dropbox.com/u/3727020/SAM_0258.JPG http://dl.dropbox.com/u/3727020/SAM_0259.JPG http://dl.dropbox.com/u/3727020/SAM_0261.JPG http://dl.dropbox.com/u/3727020/SAM_0263.JPG Link to comment Share on other sites More sharing options...
Rob AC Posted May 1, 2012 Author Share Posted May 1, 2012 "Do the keys from WASD come with these "slots" so the pins on wither side of the main switch can be fitted, or can you get on OK without them?" Sorry for the late reply- Yes the WASD shift, straight Enter key and backspace keys do come with the three slots. Not sure about your oversized Enter key though. However, be warned the WASD Spacebar did not fit the K90 - so I left the original spacebar on the keyboard. (Not sure if other manufacturers will have a direct drop in backlight spacebar that will fit the Corsair K series.) The WASD spacebar was a few mm short and the stabilizer slots on either end did not line up properly. I never got around to filing them off to see if that would work. I was afraid of having a wonky, lopsided spacebar. I think I'll do this soon and see. I will update to let you know. BTW- really digging that oversized Enter key! I never knew this was option. I happen to like oversized Enter keys. When I am typing away I sometimes miss the straight narrow one on keyboard. :) Link to comment Share on other sites More sharing options...
Wired Posted May 1, 2012 Share Posted May 1, 2012 BTW- really digging that oversized Enter key!I think non-US keyboards get the big Enter key. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.