Cooler Master CM692 Advance H100 Push/Pull on the top

[AenonElec]

I tried the push and pull on the top of the case, something not commun whatsoever. And I'm pretty happy.
I'm using 2X 140mm fan bottom intake, 1X 140mm fan front intake, 1X 120mm fan rear intake and 4X 120mm fan top exhaust.
Here are some pictures, more coming soon. Please leave some comments
IMAG0146.jpg

IMAG0147.jpg

IMAG0150.jpg

IMAG0161.jpg

IMAG0167.jpg

[AenonElec]

Like I said I at last upgrade a lil' bit my rig.
I replaced the two fans which are pulling hot air out to hook them inside the case. They are now cooling my ram and the dual Evga Gtx 670 FTW, I also upgrade my psu. Soon I'll publish my 3d Mark 11 score and some stress test for the cpu temperature

[AenonElec]

I finally finished my built

[AenonElec]

Computer Case : Cooler Master 690 II Advanced NVIDIA Edition
CPU : Intel i7 3770K - (4 x 3.5 GHZ) - Ivy Bridge at 4.6 GHz
CPU Heatsink : Corsair H100
Memory : Corsair Vengeance 16GB 1600MHz (4x4GB blue&red)
Hard Drive #1 : Intel SSD 330 series 120gb
Hard Drive #2 : Corsair Force Series 3 240 GB
Graphics Card : eVga GTX 670 FTW x2 at 1228 MHz
Motherboard : Asus Sabertooth Z77 (Intel Z77)
Sound Card : Motherboard Integrated HD Sound
Networking : Edimax Wireless LAN 300Mbps (PCI-E)
Power Supply : Corsair HX 1050W psu
Optical Drive #1 : Samsung 24x DVD Re-Writer/Reader /- RW- Black - Lightscribe (SATA)
Fan Controller #1 : Akasa AllinOne 2
Fan Controller #2 : Aerocool V12XT
Fans : Akasa Viper (4x120mm, 1x140mm), Akasa Crystal green LED 120mm, ******** ZM-SF3 (2x120mm) and Cooler Master Crystal green LED 140mm
Keyboard : Logitech K270 Wireless Keyboard
Mouse : Logitech M510 Wireless
Btech BT7333 AViBALL Flat Screen Desk Mount with Glass Base - Black
Monitor : ASUS VE247H 24 inch LED triple screens
Sharkoon 4-in-1 Kit 30cm Cold Cathode Fluorescent Green
Speakers : Sandstrom 2.1

[wytnyt]

yes a very nice build but if possible [i have same case so it is] i would have installed the rad the other way cause once you add 5 1/4 bay devices the wires will cluster around the rad lines since all wiring comes out the rear
[ask me how i know]

[AenonElec]

How you know

[wytnyt]

Originally Posted by AenonElec

How you know

well since you just had to ask
i tried my rad your way,then added a memory fan and couldnt because of the rad lines but it was good i did change it because the 5 wires going to my controller card would have interfered too.
how people keep their rigs so clean is beyond me

[AenonElec]

For my part I never tried to hook a memory fan, they're getting cool only by the 2nd Zalman fan that I previously installed inside the 5.25" Drive Bay

[Allan Davidson]

Hello mates.

AenonElec, I have a CM 690 II Adv and I'm thinking of buying a H100i and make a push-pull like you did on top of the case, but I have 2 little doubts.

1) Is it possible to make a Push-Pull with the 2x original 120mm fans on bottom of radiator, and 2x 140mm fans on top of radiator/case? Is it even possible to use 4x 140mm?

2) A lot of people says that the the original H100 fans are better than any other fans like yours Akasa Viper and Corsair SP120/SP140.

Many thanks. :)

[AenonElec]

Hi
Sorry mate, I think you can't use two 140mm, neither four of them. 'coz they''re too large.
And for my part the Akasa viper are a bit better than the original h100 fans whose fans at full load are very loud

[AenonElec]

Could you please upload some pics of your setup if you get over it

[AenonElec]

My H100 passed away & I don't have any other CPU cooler, so I've to wait for RMA.
I have a big issue with my H100. The fan control light is off and my PC doesn't boot to Windows. It says something like "the CPU fan is not recognized. press F1 to go on Bios mode". The 4 fans that I plugged to the H100 are very slow because the profile button doesn't work. I tried to reset firmware like said RAM GUY on the forum, nothing happened. Moreover the pump got very loud. I think it's just a big failing unit. Why me, it's disgusting

[AenonElec]

Just sent the package to Corsair today. I'm quite upset 'coz I've to buy a cheap new cpu cooler.