BiZaZ Posted October 4, 2016 Share Posted October 4, 2016 I know it's a silly question since lots of people have successfully done it, but for some reason I am failing to mount mine on 1151 and the attachment seems to blame. Components: https://abload.de/img/img_20161004_22411097yzus9.jpg As suggested by the user manual, I fit the backplate (F) then screw the standoff screws (G) in, then put the bracket (B) on top of the AIO and try tighten it all together with thumbscrews (K). No rocket science. However, it seems that the standoff screws (G) are too long. When the bracket (B) beaches on all four of these (i.e. there is no way to scew it down further) there is still a 1-2mm gap between it and the AIO head, due to which the latter has virtually no contact with the CPU. Let me show what I'm on about: https://abload.de/img/img_20161004_22540917gqukw.jpg I only got three types of standoff screws with my mainboard: https://abload.de/img/img_20161004_22271562rqokm.jpg The top ones are the only ones that I can physically use since the other two are a bit thicker on one end and don't fit into the backplate or in the thumbscrews. Help. Link to comment Share on other sites More sharing options...
BiZaZ Posted October 5, 2016 Author Share Posted October 5, 2016 It seems that Corsair have supplied wrong standoff screws with my AIO. My standoffs are ~15.5mm thick (without the threads) https://abload.de/img/img_20161005_12180352fbs7f.jpg ..while the standoffs of another H110i are ~13.5mm https://abload.de/img/14536644_101539590011ynstv.jpg Link to comment Share on other sites More sharing options...
c-attack Posted October 6, 2016 Share Posted October 6, 2016 Contact Customer Support through the ticket system. Unfortunately the specifications for the standoffs are not listed and I do not have the exact model to compare and confirm. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.