ImtheBest Posted January 19, 2014 Share Posted January 19, 2014 Amazing:eek: Can't believe this thing Anyway I wanted to know if the New Case is going to be bigger. Old Case http://i.imgur.com/GEzlxaz.jpg New Case I'm getting http://i.imgur.com/TAT0Uty.png I Also want to know if the H100i water Cooling will work in the 750D case on TOP radiator & fans Sorry about this posted this in someone else's thread Quote: H100i does right? so the H100i radiator & fans will fit on the Top. I like how the H100i light up and software and u can change colors right? As to the H100 can u not do this. I'm Also going to Buy the 750D its amazing i like how clean it looks with all those nice filters on the top and bottom. Unlike the 900D i was gonna jump on it because it has three fans on the front like the one i have in in my profile. But i really don't like the 900D Top how it doesn't have the rubber filter on it makes it look even better and cleaner Any other Help and suggestions are considered to me All the help i can get Thank u Operating System Windows 8.1 Pro with Media Center 64-bit CPU Intel Core i7 2600K @ 3.40GHz 28 °C Sandy Bridge 32nm Technology Cooler Master Hyper 212 Plus - CPU Cooler RAM 8.00GB Single-Channel DDR3 @ 665MHz (9-9-9-24) Motherboard Gigabyte Technology Co., Ltd. P67A-UD4-B3 (Socket 1155) 18 °C Graphics IPS225 (1920x1080@60Hz) 1023MB NVIDIA GeForce GTX 560 Ti (NVIDIA) 34 °C Storage 1863GB Western Digital WDC WD20EARX-00PASB0 ATA Device (SATA) Optical Drives ASUS DRW-24B3ST c ATA Device Audio Realtek High Definition Audio Link to comment Share on other sites More sharing options...
ComputerMD82 Posted January 20, 2014 Share Posted January 20, 2014 Hi! That is the exact same upgrade path I took. The H100i will definitely fit, I was even able to add 2 more fans for a push/pull configuration. Note that fitting the 8-pin CPU power cable may be tricky, I actually had to sand down a corner of the clip, but its all in there. I'll upload pics tonight when I get home if you'd like :) Matt Link to comment Share on other sites More sharing options...
ImtheBest Posted January 20, 2014 Author Share Posted January 20, 2014 ya definitely would like to see. Thank u ComputerMD82. Nice did u have same Case? Also what do u mean 8-pin CPU power cable may be tricky. Guess I'll see in screenshots and what do u mean by adding push/pull fans where at and what size 120mm 140mm. Also is the New Case going to be Bigger. And I'm New to water Cooling do u need liquid or something or NO. First time doing this alittle scared about it tho hope water don't spill out Link to comment Share on other sites More sharing options...
ComputerMD82 Posted January 21, 2014 Share Posted January 21, 2014 Yep, I had the exact same case, the DF-85. You can see a pic of my old rig in my avatar still! I'll take pictures of the 8-pin connection on my motherboard and how close the fans are. The h100i uses 120mm fans by the way. The 750D is roomier, better cable management as well. I added hard drive cages to mine, I have 13x 3.5" hard drives in the case and I had enough room for all the cables. I also have 6x 2.5" drives. As far as the water cooler, these type are closed loop (contained) systems. I've handled at least a dozen and have never had one leak. You don't need to add anything to it, the liquid coolant is pre-installed and sealed. My first closed loop cooler has been in use for almost 3 years and its still going strong. Link to comment Share on other sites More sharing options...
ImtheBest Posted January 21, 2014 Author Share Posted January 21, 2014 one reason I'm changing is cuz of the front 3 fans on the DF-85 rattle and ive tried everything to stop it and still rattle. Not sure what 8-pin connection u mean tho havent installed any cooler before. DO u put the fans on the radiator and which way u have them turnd to get best air. Link to comment Share on other sites More sharing options...
ImtheBest Posted January 21, 2014 Author Share Posted January 21, 2014 Also I'm unaware where do these pins go on the mombo do i need something else or something http://i.imgur.com/U6rZWkl.jpg Link to comment Share on other sites More sharing options...
ComputerMD82 Posted January 21, 2014 Share Posted January 21, 2014 The 2 cables shown are fan speed control and power. The fan speed control plugs in to the CPU Fan header on the motherboard: http://www.pcstats.com/articleimages/201110/installFM1_5123.jpg There is another cable, although it's not shown in your pic, that you plug in your fans to. The H100i supports 4 fans. The other is the power cable for the pump. It uses a SATA power connection. (The same you would use to power a hard drive or SSD). Just got home, pics coming soon. Link to comment Share on other sites More sharing options...
ImtheBest Posted January 21, 2014 Author Share Posted January 21, 2014 What Pic is that? This is my motherboard http://i.imgur.com/DfpFEUU.jpg Gonna look at some videos see if i can look on how its installed Link to comment Share on other sites More sharing options...
ImtheBest Posted January 21, 2014 Author Share Posted January 21, 2014 Do Need any other connections,connecters for the water cooler m8 Link to comment Share on other sites More sharing options...
ImtheBest Posted January 21, 2014 Author Share Posted January 21, 2014 Not sure about these connectors too do i use both of them and where do they go i read where but just don't see how its all fit http://cwsmgmt.corsair.com/media/Blogs/h100i_install/2013-02-06_16-18-07_770.jpg Link to comment Share on other sites More sharing options...
ComputerMD82 Posted January 21, 2014 Share Posted January 21, 2014 That cable powers the fans. It connects to the cooler right above the Corsair Logo on the pump. Here are some pictures I took. If you need details of anything feel free to ask. The first few show you the space inside the 750D. I have the case maxxed out, and everything fits just fine. There is a generous 1.25 inches for cable management on the back as well. http://imagizer.imageshack.us/v2/1024x768q90/838/m3t8.jpg http://imagizer.imageshack.us/v2/1024x768q90/838/e3zh.jpg http://imagizer.imageshack.us/v2/1024x768q90/690/j84n.jpg These show the watercooler. I'm using 4 fans total with the radiator. All of these fans are blowing upwards. The 2 under the radiator "push" the air through the radiator, and the 2 upper fans "pull" the air out of the case. That's what people mean when they call it "push/pull" You don't have to add the 2 extra fans. If you only use 2 fans, use the "push" configuration. http://imagizer.imageshack.us/v2/1024x768q90/199/l0e1.jpg This shows the CPU power (8-pin connection). For my board, it's awfully close to the fans. On your board it looks like the connector is further down, you should be fine. http://imagizer.imageshack.us/v2/1024x768q90/27/opuw.jpg Looking at the top of the case, you'll see mounting holes not only for 120mm fans, but also for 140mm fans. I would still stick with the H100i cooler. The added width on the 140mm fans (and H110 cooler) may interfere with your motherboard if you use a push/pull config. http://imagizer.imageshack.us/v2/1024x768q90/401/pn7f.jpg I have 120mm fans with the H100i cooler, and this is all the clearance I have. http://imagizer.imageshack.us/v2/1024x768q90/39/2n0y.jpg Here are some comparison pics with the Darkfleet DF-85 Case. They're similar in height, but length and depth are longer on the 750D. HDD mounts point to the back so all the cables are hidden, and you have much more cable management space with the 750D. Also, installing and water cooler to the top of the DF-85 means you potentially lose the use of one optical bay, or you lose one of the rear fans. Way too cramped for this cooler. http://imagizer.imageshack.us/v2/1024x768q90/202/10h1.jpg http://imagizer.imageshack.us/v2/1024x768q90/19/8gt1.jpg Link to comment Share on other sites More sharing options...
ImtheBest Posted January 21, 2014 Author Share Posted January 21, 2014 Them two connectors for the fans seems like they go into the one fan in your pic. I'm totally lost m8 Link to comment Share on other sites More sharing options...
ComputerMD82 Posted January 21, 2014 Share Posted January 21, 2014 The kit comes with 2 of those cables. Each cable powers 2 fans. Therefore, if you're installing 4 fans like I did, you need both cables. If you're installing 2 fans, you only need one cable. Link to comment Share on other sites More sharing options...
ImtheBest Posted January 21, 2014 Author Share Posted January 21, 2014 Well lets hope i install it right. I'll let u know down the road how things go and if i need any help i'll let u know. Thanks Link to comment Share on other sites More sharing options...
ComputerMD82 Posted January 22, 2014 Share Posted January 22, 2014 Anytime! Good luck :) Link to comment Share on other sites More sharing options...
ImtheBest Posted January 22, 2014 Author Share Posted January 22, 2014 Hi buddy can u explain what Push/pull is. is it having your fans at the top with radiator Link to comment Share on other sites More sharing options...
wytnyt Posted January 22, 2014 Share Posted January 22, 2014 Hi buddy can u explain what Push/pull is. is it having your fans at the top with radiator this means having fans on both sides of the radiator pushing and pulling air Link to comment Share on other sites More sharing options...
ImtheBest Posted January 23, 2014 Author Share Posted January 23, 2014 Thanks wytnyt :D that seems little tricky well don't have enough fans to do that for now so its not gonna be like that. And still lost on the how it H1ooi hooks up with them fan connectors. hope its easyer then how it looks Link to comment Share on other sites More sharing options...
wytnyt Posted January 23, 2014 Share Posted January 23, 2014 the h100i has 2 fan leads at the block,,the h100i came with 2 y cables to enable the connecting of 4 fans Link to comment Share on other sites More sharing options...
ImtheBest Posted January 23, 2014 Author Share Posted January 23, 2014 the h100i has 2 fan leads at the block,,the h100i came with 2 y cables to enable the connecting of 4 fans yes i know that already m8. Just difficult for me with out the H100i in my hands on not sure where everything goes to imagine.....feel me Link to comment Share on other sites More sharing options...
ImtheBest Posted January 23, 2014 Author Share Posted January 23, 2014 NO video shows them connectors being installed and where where at in fan and on the H100i Link to comment Share on other sites More sharing options...
wytnyt Posted January 23, 2014 Share Posted January 23, 2014 let me see if i can find the video i had showing hookups here ya go,it also answers your previous post regarding the wire question on post #10 http://www.corsair.com/us/blog/how-to-install-the-hydro-series-h100i-cpu-cooler/ http://cdn.pcper.com/files/review/2013-01-01/06-h100i_fan_connect.png Link to comment Share on other sites More sharing options...
ImtheBest Posted January 23, 2014 Author Share Posted January 23, 2014 Thanks very much Link to comment Share on other sites More sharing options...
ImtheBest Posted February 1, 2014 Author Share Posted February 1, 2014 I buddy ComputerMD82 Got my New Case And New Water Cooler H100i. Having some trouble tho with the H100i can't u speed it up and change the leds on it. Can't seem to do that booted up and its just white led Link to comment Share on other sites More sharing options...
ComputerMD82 Posted February 1, 2014 Share Posted February 1, 2014 As long as you have the USB cable connected, you can control the fan speed and LED color using the Corsair Link software: http://www.corsair.com/media/cms/drivers/CorsairLink-Installer-RC-v2.4.5110.exe Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.