Dr Clockworks Posted January 19, 2019 Share Posted January 19, 2019 Hello! I recently installed the iCUE software and it's causing my fans on my H115i to constantly change in speed. It's like someone is reving a car engine, the RPM goes up and then immediately drops over and over. I've tried to change the profiles in the software, but it doesn't seem to be working. Could someone help give me instructions on how to either disable to fan control or to set the profiles properly? Link to comment Share on other sites More sharing options...
natefrog Posted January 19, 2019 Share Posted January 19, 2019 You might be having the same issue I do. Do you get the Windows' USB disconnect/reconnect sounds when it happens? See my topic 'Devices Disconnect/Reconnect Randomly'. Link to comment Share on other sites More sharing options...
Dr Clockworks Posted January 22, 2019 Author Share Posted January 22, 2019 Sorry it took me a few days to reply. No, I don't have that kind of issue with it. It's simply just a constant up and down with the fans and this only started to happen after I installed the iCUE software. Before that everything was fine with the setup. Link to comment Share on other sites More sharing options...
DevBiker Posted January 22, 2019 Share Posted January 22, 2019 Check the source temperature for the fan curve. If it's CPU Package, that's the problem. Set it to coolant temp. Link to comment Share on other sites More sharing options...
Dr Clockworks Posted January 22, 2019 Author Share Posted January 22, 2019 There is no "coolant temp." in the drop down menu when I go to edit the main profile. I see my CPU/cores, my GPU, my motherboard sensors, and the H115i Temp. Is the H115i Temp the coolant temp? Link to comment Share on other sites More sharing options...
BlaiseP Posted January 22, 2019 Share Posted January 22, 2019 ^^^ Yes, you are correct. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.