Jump to content
Corsair Community

Corsair Hydro H100I RGB Platinum not showing in Corsair Link 4


r0uter

Recommended Posts

Full disclaimer: This is the first computer I've assembled on my own and I am fairly new to the whole thing.

 

My Corsair H100I RGB Platinum is not showing in my Corsair Link 4. I can see the RPM's of the fan under the general information of the Mobo, but the cooler is not seen seperately and I have no way of managing it.

 

I've tried reading through the posts here, but so far I haven't found a solution that works for me.

 

Here's what I know:

I connected the H100I RGB Platinum to the SATA power, I connected it to the 2 fans, I connected it to the RGB headers and I connected it with a micro USB to the USB header.

I've seen posts mentioning product ID and vendor ID. As far as I can see the H100I RGB Platinum is connected in Port_#0014.HUB_#0001, vendor id: 1b1c, product id: 0C18.

 

I'm not sure how to proceed from here. Any advice for a rookie?

 

I'm using an Asus ROG STRIX B450-F Gaming Mobo, if that is relevant in any way.

Link to comment
Share on other sites

×
×
  • Create New...