Wavefury Posted August 15, 2014 Share Posted August 15, 2014 I have a Carbide Series 400R, and I was interested in putting a Chassis Intrusion System in to alert me if a room mate has opened my case. The only Intrusion switches I've dealt with were in stock workstation PC's, so I don't know where to find one that is compatible with my case, or where to mount it if I did find one. There appears to be a mounting Bracket of some sort about an inch or two from the bottom of the case; is that where it goes? If so, All I have left is the compatibility issues, because all the switches I see look like they point straight up while mounting to that spot would require a 90 degree bend in the switch from mounting point to trigger. Thanks in advance for any advice Link to comment Share on other sites More sharing options...
wytnyt Posted August 15, 2014 Share Posted August 15, 2014 just buy some tamper proof tape,once applied it breaks if disturbed much cheaper...;): Link to comment Share on other sites More sharing options...
Wavefury Posted August 15, 2014 Author Share Posted August 15, 2014 Eh, tamper-tape seems like a one-shot solution. I'd have to reapply the tape every time I open the case to clean it out, and the adhesive could leave behind a residue. I've seen tamper switches in action and my motherboard supports one, so I figure why not go all out. Besides that, I'd like to get full functionality from my case, and if that niche I mentioned isn't for a tamper switch, then I'm all out of Ideas on what it could be. Link to comment Share on other sites More sharing options...
wytnyt Posted August 15, 2014 Share Posted August 15, 2014 i see,,well this sounds pretty neat http://www.ehow.com/info_12214655_lenovo-chassis-intrusion-switch-work.html Link to comment Share on other sites More sharing options...
wytnyt Posted August 29, 2014 Share Posted August 29, 2014 like exlax-im slow but sure:D: i found this tamper proof switch,it may be just what you need...http://www.aquatuning.us/water-cooling/monitoring/push-button-switches/12544/phobya-vandalism-proof-switch-19mm-aluminium-black-yellow-ring-lit-6pin?c=6597 Link to comment Share on other sites More sharing options...
Wavefury Posted August 29, 2014 Author Share Posted August 29, 2014 Thanks, wytnyt, I'll check that out. :D Link to comment Share on other sites More sharing options...
thenosbod Posted August 30, 2014 Share Posted August 30, 2014 search for case intrusion switch on flea bay and I am sure you will be able to find something which you can make work with your case. your motherboard as got connections for a switch. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.