Jump to content
Corsair Community

Recommended Posts

Hello everyone, I would like to start this new project, I have seen on the net and in this forum that there are already many (all fantastic and crazy) but I'd like to have something that occurrence can be closed to make space for another place and maybe even in the wall of the living room where the TV is.

Let's start with these pictures, they are not very good at drawing, this is only a draft, during the phase of the project `'ll decide how to proceed.

The fixed points are: folding desk fixed to the wall with support for keyboard and mouse attachment.

 

A big thank to all my sponsors who are helping me with this project

 

jcT8LK.jpg

 

OLj8Zm.jpg

 

Sd3xj4.jpg

 

 

Specs:

Cpu: Intel i7-4790

Motherbord: Asus Maximus VII Impact

Vga: ASUS GeForce GTX 750 Ti OC

Ram: Kingston HyperX Fury memory 8gb

HDD: HyperX 3K SSD 120gb - Pny XLR8 SSD 120gb

Psu: Enermax Revolution XT 730W Gold 80 plus

Fan: Six Enermax T.B. Apollish Blue

Keyboard: Corsair K70 Red

 

 

final+desk.jpg

 

desk+camera.jpg

 

deskcamera2.jpg

 

deskcamera3.jpg

 

deskcamera4.jpg

 

deskcamera5.jpg

 

deskcamera6.jpg

 

tips are welcome, thanks

Link to comment
Share on other sites

Hello everyone, today I took the chipboard panels and I cut the most important parts.

 

IMG_20140709_165408.jpg

 

IMG_20140709_184700.jpg

 

IMG_20140709_184731.jpg

 

These will be the supports of the desk....

 

IMG_20140709_193921.jpg

 

IMG_20140709_195841.jpg

 

This panel will set the side fan ...... 3 will be on one side and 3 on the other side

 

IMG_20140710_125238.jpg

 

this is how it goes on the bottom panel and placed the hardware

 

IMG_20140710_170131.jpg

 

IMG_20140710_175629.jpg

 

stay tuned ;)

Link to comment
Share on other sites

Saw the cheap psu before I read "Temporary Power Supply" almost died thinking all this work for that haha. Look great so far can't wait to see the finished product. I'd also go with a few monitors vs a tv but that's just me.
Link to comment
Share on other sites

Saw the cheap psu before I read "Temporary Power Supply" almost died thinking all this work for that haha. Look great so far can't wait to see the finished product. I'd also go with a few monitors vs a tv but that's just me.

 

tv's are much bigger and cheaper,,assuming of course you arent a gamer

Link to comment
Share on other sites

Cut the top panel to glass

 

IMG_20140722_145439.jpg

 

IMG_20140722_160008.jpg

 

mesh for cooling fans

 

IMG_20140722_231754.jpg

 

IMG_20140722_210101.jpg

 

IMG_20140723_112530.jpg

 

IMG_20140723_112706.jpg

 

and here it is attached to the wall

 

IMG_20140724_203558.jpg

 

IMG_20140724_221806.jpg

 

IMG_20140724_221830.jpg

 

IMG_20140724_222147.jpg

 

IMG_20140724_222324.jpg

 

IMG_20140724_222429.jpg

 

IMG_20140724_222503.jpg

 

IMG_20140724_222630.jpg

 

IMG_20140724_222835.jpg

 

ok guys what do you think? are in half the work. there still so much to do .....

Link to comment
Share on other sites

Looking really clean, especially since it's being cut with hand tools. Can't wait to see more. Corsair you need to sponsor this build.

 

thanks a lot, maybe .... I would very much help .... hope you like it too Corsair

 

Hi guys, a little upgrade ..... I built support for the keybinding and mouse. there is still some finishing and the bottom cap

 

IMG_20140726_183724.jpg

 

IMG_20140726_183836.jpg

 

IMG_20140726_184120.jpg

 

IMG_20140726_184300.jpg

 

IMG_20140726_190140.jpg

 

IMG_20140726_185930.jpg

 

IMG_20140726_192005.jpg

 

IMG_20140728_163122.jpg

 

IMG_20140728_163151.jpg

 

IMG_20140729_212501.jpg

 

IMG_20140729_212822.jpg

 

IMG_20140729_213042.jpg

 

IMG_20140729_213129.jpg

 

IMG_20140729_213156.jpg

 

IMG_20140729_213334.jpg

 

IMG_20140729_213456.jpg

 

Stay Tuned ;-)

Link to comment
Share on other sites

hello guys, today I built the front panel power button, reset and ignition lights

 

IMG_20140802_164252.jpg

 

IMG_20140802_171103.jpg

 

IMG_20140802_180118.jpg

 

I also added 3 blue LEDs that illuminate the panel at night

 

IMG_20140802_180208.jpg

 

IMG_20140802_192012.jpg

 

IMG_20140802_192045.jpg

 

I created the cover for the wires from the front panel of an old radio

 

IMG_20140802_192130.jpg

 

IMG_20140802_192231.jpg

 

IMG_20140802_192301.jpg

 

IMG_20140802_192503.jpg

 

IMG_20140802_192630.jpg

 

ok guys, it's all for the moment .... I hope you enjoy it ;-)

Link to comment
Share on other sites

ok guys, some up. I got the double glass is 8mm, and I have siliconized. I inserted the led lights and to test to see what effect it had, the hardware you see is temporary, slowly will buy everything and I will insert ... hope you like it

 

IMG_20140807_234206.jpg

 

IMG_20140807_234251.jpg

 

IMG_20140807_234516.jpg

 

IMG_20140807_234537.jpg

 

IMG_20140807_234604.jpg

 

IMG_20140809_004623.jpg

 

IMG_20140809_131428.jpg

 

IMG_20140809_172131.jpg

 

IMG_20140809_172212.jpg

 

IMG_20140809_172430.jpg

 

IMG_20140809_172529.jpg

Link to comment
Share on other sites

Really like what you did there, congrats! :)

 

wow, thanks a lot Peter ...... receive compliments from you is an honor ...... your L3P me is was very inspiring .... I hope to get a bit of support because `is very tough ......... thanks again

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...