Jump to content
Corsair Community

Raid 0 Seems Slow with Two SSDs


Recommended Posts

Hello, I've got my two Corsair SSDs today and I used hardware Raid 0 with stripe size of 64K to install them. When I ran the ATTO Benchmark utility the speeds were about 200MB/s. This seems pretty low to me as other websites have about 500MB/s (with raid 0). Although I do use SATA 2. I've tested a 4GB file from folder to folder and it started at about 150MB/s and slowed down to about 100MB/s. Are the 100-150 speeds normal for a Raid 0 SSD on SATA 2 or should I try to fix something? Also I would like to know the proper method for garbage collection since the TRIM function is disabled, do I log off and just let the PC sit there for an hour or two? If you have a suggestion please tell me, thanks.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...