Jump to content
Corsair Community

lightning node pro connection question


SisU303

Recommended Posts

Hi, I need some help...

 

I have the following:

Fans: 6x Corsair SP120 RGB LED

Led: 9x Corsair Link RGB LightingStrips

 

I also have 2 rgb fan led controllers + 1 lightning node pro hub.

 

Is it possible to connect these things together using 1 node pro or do I need another one?

 

Also the fan led cables are too short, is there extension cables available anywhere?

 

Thanks in advance.

 

SisU

Link to comment
Share on other sites

Hi DevBiker and thanks for your reply.

 

I suspected this but had hopes that I didn't need anything else. Anyway, is it possible to just buy the lnp without the LEDs? I already have 16 of these because I've bought the Expansion kits...

 

Thanks in advance.

 

/SisU

Link to comment
Share on other sites

Thanks again.

I ordered a new package with a LNP and also ordered the Commander Pro.

Now I'll have 22 LEDs and 6 Fans to play around with...

 

It's for a wallmounted custom build that's 80cm x 80cm so I suppose I can find use for all this. :P

 

/SisU

Link to comment
Share on other sites

  • 2 weeks later...

So I encountered new issues.

 

I have the following connected.

 

3fans -> Fan LED hub1 - > CoPro (LED channel 1)

3fans -> Fan LED hub2 -> CoPro (LED channel 2)

No issues with the above 2.

 

LNP1 -> CoPro (USB)

Channel1 has 6 strips connected to it, only 2 is working.

Channel 2 has 3 strips connected and no problem here.

 

SO it's the LNP channel 1 that only works for 2 of the 6 strips. I have changed the amount of strips in the lightning options to 6 but it's not doing anything.

 

I have a second LNP that I don't use at the moment, At first I connected the 2 fan hubs to this and from the to coPro but the LNP didn't even appear in icue.

 

Any suggestions to why the 4 strips not working?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...