madmecca1975 Posted March 9, 2015 Share Posted March 9, 2015 hello i have just got some new parts and major problems having to rma them intel i7 5930k msi x99s gaming 9 ack g.skill 2400mhz ram and all the rest of the bits from my old pc now got it all together and none stop problems with ram slots not working usb off and on so i am sending back motherboard and ram first of all. now my question is the ax1200i i have been doing a little bit of research and came across a web site with problems with something to do with ocp. now i have not used corsair link software for awhile because it was so buggy. and on the web site it said about psu made before 2013 mine looking at the numbers on s/n first four are 1229 so does that make it 2012 29 week. what do i need to do do i need to enable ocp or disable it thanks in advance Link to comment Share on other sites More sharing options...
madmecca1975 Posted March 9, 2015 Author Share Posted March 9, 2015 i found this page can anyone shed some light on this please thanks http://www.legitreviews.com/intel-x99-motherboard-goes-up-in-smoke-for-reasons-unknown_150008 Link to comment Share on other sites More sharing options...
Corsair Employee jonnyguru Posted March 10, 2015 Corsair Employee Share Posted March 10, 2015 i found this page can anyone shed some light on this please thanks http://www.legitreviews.com/intel-x99-motherboard-goes-up-in-smoke-for-reasons-unknown_150008 Read through that whole thing. What's on that page has nothing to do with what you're experiencing. He LITERALLY burned up the CPU VRMs. To enable/disable OCP, you need the Link software. But that's not going to have anything to do with your problem, so wait until you get your replacement board and RAM back. Link to comment Share on other sites More sharing options...
madmecca1975 Posted March 10, 2015 Author Share Posted March 10, 2015 ok cheers jonnyguru Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.