iamamoron Posted July 18, 2019 Share Posted July 18, 2019 (edited) Hello I have received a built system which is in a Corsair Osbidian 750D Case. There are 2 SSD's installed and they set up a RAID 1 for me. However Immediately I am getting "Warning Critical Error" (Says "RAID critical error R/W) message each time I boot, but it does then go on to boot fully. Therefore I am going to try and remove 1 of the 2 x SSD's and see if it or other one has failed. Question is, I have never dealt with this case. HOW do I remove the SSD (it is in the cage at bottom and by looks 3 screw on side holding it in. Will the cable be at back ,or does it just slot in ?. What is easiest way to install a 3rd or 4th SSD ?. Thanks for any pointers. It is the CABLING I am most unsure of ,i.e. are there any cables involved ,or do the SSD's just slot in ? What type of Cables if any ?. (My Profile shows most of system) Thanks Edited July 18, 2019 by iamamoron Link to comment Share on other sites More sharing options...
Recommended Posts