TBash Posted April 10, 2013 Share Posted April 10, 2013 Ever since i bought this case i dreamed of modding it but one thing lead to another(a game came out and i had to be palying it) So modding got pushed to the back of my priorities,Well after moving and getting a girlfriend i realized i have not been gaming nearly as much but i was still itching to Mod my case so The Bash Box was born. I have done quite a lot to get to the point im at so here goes nothing. http://i1285.photobucket.com/albums/a581/TheOneAndOnlyTBash/bashbox_zps520c4638.jpg http://i1285.photobucket.com/albums/a581/TheOneAndOnlyTBash/20130316_175000_zpsf7898843.jpg Drilled out the rivets for the 5.25 drive cage as i have no need for a dvd drive and plan on mounting my fan controller and card reader somewhere else . DUN DUN DUN http://i1285.photobucket.com/albums/a581/TheOneAndOnlyTBash/20130321_190838_zps98a5cb47.jpg I cut out enough room so the fan controller wont hit i was just using the dvd drive as a guide. http://i1285.photobucket.com/albums/a581/TheOneAndOnlyTBash/20130321_191106_zpsb72a9f7a.jpg Out with the old. A lot of dremmeling and filing and finally it will fit. http://i1285.photobucket.com/albums/a581/TheOneAndOnlyTBash/20130408_152717_zpse96bee10.jpg In with the new. All i have to do is find a way to affix both of them permanently. http://i1285.photobucket.com/albums/a581/TheOneAndOnlyTBash/20130408_152742_zpsf468dd79.jpg This is a simple switch mod i made to control the bitfenix fans . http://i1285.photobucket.com/albums/a581/TheOneAndOnlyTBash/20130408_152936_zpsacbb08f9.jpg And here is the state of things as they are right now. I plan on having LED's around the entire rim of the front bezel and where you can see the two 200mm fans i will have a 400mm radiator , I still am on the fence about if im going to have a 240 or 360 radiator in the top of the case. Also something you cant see is i have a logisys remote start that i mounted to the back of the case normally it would sit in a PCI slot but i did not want it sticking out there. This case will be liquid cooled at some point but right now im strictly sticking to modding. Link to comment Share on other sites More sharing options...
TBash Posted April 19, 2013 Author Share Posted April 19, 2013 In the process of updating this post i am waiting on a couple order such as a 400mm radiator and some other odds and ends to make my super top secret reservoir, Hopefully within the next couple days i will be adding some pictures or a video update. Link to comment Share on other sites More sharing options...
TBash Posted July 24, 2013 Author Share Posted July 24, 2013 Sorry guys i have been working on this so heres a couple more pictures and a link to my youtube account where i have been video documenting it. http://i1285.photobucket.com/albums/a581/TheOneAndOnlyTBash/IMG_20130723_213339_zps7584005a.jpg http://i1285.photobucket.com/albums/a581/TheOneAndOnlyTBash/IMG_20130723_213326_zpsadda3a0f.jpg I apologize for the video quality better quality videos will be forthcoming. Im waiting on the Maximus 6 Formula to be released i am leaning towards that board for this build. Also i am waiting on a clear side panel from MNPCTECH.com should be here in 3 weeks so yeah that is the state of things so far. Link to comment Share on other sites More sharing options...
TBash Posted September 2, 2013 Author Share Posted September 2, 2013 So i had a bit of a catastrophic failure i managed to destroy the entire front panel of my corsair but in the mean time i have managed to get a new reservoir made up(after having dropped the last one) and so far things seem to be going alright . http://i1285.photobucket.com/albums/a581/TheOneAndOnlyTBash/DSC00278_zps3786b0e2.jpg http://i1285.photobucket.com/albums/a581/TheOneAndOnlyTBash/DSC00280_zpse4e1b97c.jpg http://i1285.photobucket.com/albums/a581/TheOneAndOnlyTBash/DSC00279_zpsfe83113c.jpg Up next comes leak testing which i am probably going to create one of those pond pump bucket and in line water filter systems for the sheer convenience and just to clean out everything. Link to comment Share on other sites More sharing options...
lghtng2 Posted January 4, 2014 Share Posted January 4, 2014 Do you still have the 5.25 bay cage and would you be willing to sell it? I need one as I have gone a different direction in my build and cut mine already. :(: Please message me either way. Thanks, lghtng2 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.