The Time

http://i67.tinypic.com/313mw5s.jpg

http://i64.tinypic.com/slli4g.jpg

My project is called “The Time”, characterized by elegance, precision and attention to details while looking the aesthetics impact by using colours’ contrast like silver/gold. The structure will be supported by aluminum profiles wrapped in mahogany and will provide the base of the case in which will be housed the PC liquid cooling system. From the base there are 8 polished aluminum pillars which will allow the securing of water tanks made with green plexiglass.

Inside one of these tanks a clock is placed and the PC cooling liquid. In the other tank there are the hardware parts, also set while trying to organize the cables in a non-chaotic way.

CPU : Intel i7 7700k

MOTHERBOARD : MSI Gaming M5 Z270

VGA : MSI GTX 1070 SEA HAWK

RAM : Corsair DDR4 Dominator Platinum Special Edition Chrome 4x8 GB 3200 MHz Limited Edition 292/500

SSD : Corsair Neutron XTi 480 GB X2

PSU : Corsair AX1200i

DEVICE :

- Corsair Gaming K70 RGB RAPIDFIRE Mechanical Keyboard

- Corsair Gaming M65 PRO RGB Gaming Mouse, Backlit RGB LED, Optical

- Corsair Gaming MM800 RGB POLARIS Mouse Pad

- Corsair Gaming Void Wireless Gaming Headset White

AIR COOLING :

- Corsair HD Series, HD120 RGB, 120mm Individually Addressable RGB LED Fan, 3 Fan Pack, With Controller

- Corsair HD Series, HD120 RGB, 120mm Individually Addressable RGB LED Fan, Single Fan X3

LIQUID COOLING :

- Alphacool Eisbrecher Pro XT45 Full Copper 360mm radiator X2

- Alphacool Eispumpe VPP755 - Single Edition X3

- Alphacool Eiszapfen 13mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled – chrome

- Alphacool HardTube 13/10mm brass chrome 40cm

- Phobya touch 630 controller

- Many other chrome fittings at 90 °, taps, bulkhead, flow meters and more

SLEEVING GOSUMODZ :

- PLX Sleeve Desert Gold

- PLX Sleeve Silver Grey

- Alliance Comb Closed 24,14,10,8,6 Pin Natural

- Alliance Comb Closed 4 Pin and 5 Pin Single Row Natural

- Thumbscrew UNC 6-32 and M3 Gold

- Connectors and terminals

- Single wire black

- Tools : Knipex Wire Stripper and Mini-Fit Jr. Extractor Tool

STRUCTURE MATERIALS :

- mahogany wood

- aluminum profiles

- grills drawn

- plexiglass soft fluo green

- brass

Sponsored by :

http://i65.tinypic.com/2rykqoo.jpg

http://i65.tinypic.com/29prugw.jpg

http://i65.tinypic.com/2yy6q1d.jpg

http://i64.tinypic.com/2na8rcz.jpg

http://i63.tinypic.com/szwy3b.jpg

http://i68.tinypic.com/359fl1c.png

http://i64.tinypic.com/161lxtk.jpg

The planning took a lot of time for an accurate study of the system of perfect gears to recreate the correct time. After it switch to draw on specific softwares 2D and 3D the gears that are carried out with cnc pantograph in inner sections and the teeth are manually operated . Creation of the linchpins to keep suspended the clock through stainless steel cables on tank containing the liquid cooling of the pc.

http://i65.tinypic.com/152l4pc.jpg

http://i64.tinypic.com/nci5vt.jpg

http://i63.tinypic.com/w2oowz.jpg

http://i67.tinypic.com/2rf4vt3.jpg

http://i66.tinypic.com/2rxiufd.jpg

http://i65.tinypic.com/2ufg4up.jpg

http://i65.tinypic.com/pwzd3.jpg

http://i65.tinypic.com/20hvvgy.jpg

http://i67.tinypic.com/33bz48o.jpg

http://i64.tinypic.com/2aah4bq.jpg

http://i63.tinypic.com/2j0m6w5.jpg

http://i67.tinypic.com/2194cqx.jpg

http://i67.tinypic.com/2d813rq.jpg

http://i65.tinypic.com/fwk2mh.jpg

http://i68.tinypic.com/iglrtg.jpg

http://i67.tinypic.com/2dqjzq0.jpg

http://i63.tinypic.com/eak0nc.jpg

http://i64.tinypic.com/71gtck.jpg

http://i64.tinypic.com/10dtk07.jpg

http://i65.tinypic.com/2u6cksy.jpg

http://i65.tinypic.com/28s34ok.jpg

http://i67.tinypic.com/opvkli.jpg

http://i68.tinypic.com/15hj2p1.jpg

http://i63.tinypic.com/othmkg.jpg

http://i63.tinypic.com/4jx4kl.jpg

http://i63.tinypic.com/2i24fw2.jpg

http://i67.tinypic.com/vwwgpg.jpg

http://i67.tinypic.com/2qtzplj.jpg

http://i67.tinypic.com/m8enwp.jpg

Anodization of various gears, pins and plates both for an aesthetic factor and to avoid galvanizing Because the clock will be immersed in the coolant.

http://i.imgur.com/ofp3kf8.jpg

http://i.imgur.com/iNItRXC.jpg

http://i.imgur.com/rhMP1Sc.jpg

http://i.imgur.com/xp2vmcN.jpg

http://i.imgur.com/66Bw1nk.jpg

http://i.imgur.com/yrON3Td.jpg

http://i.imgur.com/RZIvkoB.jpg

CNC machine production clocks parts project " The Time "

[YOUTUBE][ame]

Bonding pins and gears with industrial glue to permit gluing also in water.

http://i.imgur.com/JINqXps.jpg

http://i.imgur.com/LPwZfZv.jpg

http://i.imgur.com/ARj1w13.jpg

http://i.imgur.com/4HXcmyf.jpg

http://i.imgur.com/V1anYfw.jpg

http://i.imgur.com/G1HHgT1.jpg

http://i.imgur.com/VPqmPpt.jpg

http://i.imgur.com/IjRYAz7.jpg

First assembly test.

http://i.imgur.com/DL0MUeF.jpg

http://i.imgur.com/KiS5ZrP.jpg

http://i.imgur.com/5NhUA9y.jpg

http://i.imgur.com/JqJKLZL.jpg

http://i.imgur.com/P1ODpCe.jpg

http://i.imgur.com/aATIZvL.jpg

http://i.imgur.com/DKKDEmH.jpg

http://i.imgur.com/9FgYEsv.jpg

After a CNC cut ,finally comes a bit of aluminum sheets and proceed into the opening of 8 hole in the tube for insert plexiglass reservoirs.

http://i.imgur.com/o1Y3yYs.jpg

http://i.imgur.com/aJ1bc6G.jpg

http://i.imgur.com/p9Chabl.jpg

http://i.imgur.com/u5rxmJ1.jpg

http://i.imgur.com/60EU4hu.jpg

http://i.imgur.com/YmlL3gG.jpg

http://i.imgur.com/jQFYUDf.jpg

http://i.imgur.com/Bpb01ba.jpg

http://i.imgur.com/4UJvjy4.jpg

Create aluminum profiles for supporting the structure of the base, and finally begins of the various CNC cuts.

http://i.imgur.com/l8SPDi8.jpg

http://i.imgur.com/ra4ywyv.jpg

http://i.imgur.com/lOTfVpd.jpg

http://i.imgur.com/bSKGBBf.jpg

http://i.imgur.com/xT68Yze.jpg

http://i.imgur.com/NO9iuzI.jpg

http://i.imgur.com/kYeQ2jH.jpg

http://i.imgur.com/fd0XPeZ.jpg

http://i.imgur.com/2nRYTsJ.jpg

http://i.imgur.com/bSL8Jml.jpg

http://i.imgur.com/vaq8a26.jpg

http://i.imgur.com/NwJ6uWA.jpg

http://i.imgur.com/3OtS1rl.jpg

Custom realisation of fastening profiles for some of the base plates inclined to 30 °.

http://i.imgur.com/S9fyF52.jpg

http://i.imgur.com/cUAxynI.jpg

http://i.imgur.com/c6aufQE.jpg

http://i.imgur.com/DMsNeky.jpg

http://i.imgur.com/Ad3qtsn.jpg

http://i.imgur.com/wiA7lWU.jpg

http://i.imgur.com/ZJ5IE0l.jpg

Structure of aluminum profiles complete.

http://i.imgur.com/DXNovFm.jpg

http://i.imgur.com/oU7xySb.jpg

http://i.imgur.com/KFemPHn.jpg

http://i.imgur.com/r2EuhOs.jpg

http://i.imgur.com/dfVcMNh.jpg

http://i.imgur.com/ABOnxkW.jpg

Realization of the side panels of the base with perforated grid for a better airflow.

http://i.imgur.com/Vj4dbZM.jpg

http://i.imgur.com/KVg0w10.jpg

http://i.imgur.com/j3UF6WB.jpg

http://i.imgur.com/EkPt23M.jpg

http://i.imgur.com/d0WG0j4.jpg

http://i.imgur.com/oPwZ5lp.jpg

http://i.imgur.com/TLdhDG0.jpg

http://i.imgur.com/ACjMWQj.jpg

http://i.imgur.com/BUQnpqp.jpg

http://i.imgur.com/m3XvebU.jpg

http://i.imgur.com/mnDkfQp.jpg

http://i.imgur.com/UEUiRak.jpg

Bonding of the various mahogany wood panels.

http://i.imgur.com/i5S8nGu.jpg

http://i.imgur.com/AcOjdIp.jpg

http://i.imgur.com/fV9HZI5.jpg

http://i.imgur.com/a77C9IS.jpg

http://i.imgur.com/pHir2jx.jpg

http://i.imgur.com/ns2ZetG.jpg

Hand folding of the base structure, for get a better look, finally painted with ivory color.

http://i.imgur.com/KoveMGC.jpg

http://i.imgur.com/8QXs7v8.jpg

http://i.imgur.com/jJmFyoz.jpg

http://i.imgur.com/ytBY49L.jpg

http://i.imgur.com/cyKCzjm.jpg

http://i.imgur.com/5VkfNow.jpg

Terminal caps of the 8 tubes. Cutting of aluminum bar, finally I use the lathe and open a thread hole.

http://i.imgur.com/3xYb9KV.jpg

http://i.imgur.com/yZ9vPm1.jpg

http://i.imgur.com/WBFqw55.jpg

http://i.imgur.com/LjGzK1w.jpg

http://i.imgur.com/HZdaNRf.jpg

http://i.imgur.com/nGssWqU.jpg

http://i.imgur.com/ihA5VAL.jpg

http://i.imgur.com/jWnYMAQ.jpg

http://i.imgur.com/KMmdhqw.jpg

http://i.imgur.com/eiT80CB.jpg

http://i.imgur.com/32eNF7W.jpg

http://i.imgur.com/cTGXb2H.jpg

http://i.imgur.com/b4tprYs.jpg

http://i.imgur.com/lS3vcBH.jpg

Aesthetic ferrules positioned around 8 tubes and anchored on the wood texture. internal and external mirrored cut.

http://i.imgur.com/HP7ziap.jpg

http://i.imgur.com/0MTVBCO.jpg

http://i.imgur.com/IW19CLN.jpg

http://i.imgur.com/jeo2wsH.jpg

http://i.imgur.com/M8wOnau.jpg

http://i.imgur.com/WqJP98H.jpg

http://i.imgur.com/YHInnSv.jpg

http://i.imgur.com/9eFyhMB.jpg

http://i.imgur.com/i1lcUn8.jpg

http://i.imgur.com/U0JkzAc.jpg

http://i.imgur.com/IgQhxle.jpg

http://i.imgur.com/tpAzGbz.jpg

http://i.imgur.com/XwHeVQN.jpg

http://i.imgur.com/3WwpHIl.jpg

http://i.imgur.com/t6l0vsD.jpg

http://i.imgur.com/7qTJ0TL.jpg

http://i.imgur.com/rNHI9ol.jpg

http://i.imgur.com/FGpFYiB.jpg

http://i.imgur.com/C84ymug.jpg

http://i.imgur.com/MJ3z7Sk.jpg

http://i.imgur.com/FQqrw11.jpg

http://i.imgur.com/6XUxCVt.jpg

Terminated the terminals caps. It's visible the contrast between gold and silver after the one between clock gears and relative pins with plates.

http://i.imgur.com/nzqgGtL.jpg

http://i.imgur.com/zmZHs1N.jpg

http://i.imgur.com/ONkAdvB.jpg

http://i.imgur.com/21TG9G6.jpg

http://i.imgur.com/Orw6Rfa.jpg

http://i.imgur.com/JWvibe4.jpg

http://i.imgur.com/00ukFrp.jpg

Clock Hands in 1.5 mm thick aluminum. They will also be anodized , but with a special color...different from the gold or silver.

http://i.imgur.com/mUsWgfl.jpg

http://i.imgur.com/MZbiY5j.jpg

http://i.imgur.com/8UxCcWr.jpg

http://i.imgur.com/dzouOfI.jpg

The clock in all of his beauty.

http://i.imgur.com/eDF0w57.jpg

http://i.imgur.com/ONf6mSt.jpg

http://i.imgur.com/F3iaTX0.jpg

The plexiglass has arrived and I start immediately with the first processing. Chamfering the edges of all the sheets of 45 ° to match them to perfection. It's a special plexiglass called Soft Fluo green. It has a fantastic effect with chrome parts.

http://i.imgur.com/3vSrPjj.jpg

http://i.imgur.com/3ls0BE9.jpg

http://i.imgur.com/ZJ9K8Nw.jpg

http://i.imgur.com/RGB253u.jpg

http://i.imgur.com/sj4sch5.jpg

http://i.imgur.com/Nvx6dEx.jpg

http://i.imgur.com/7AzHpJg.jpg

http://i.imgur.com/zboyzgh.jpg

http://i.imgur.com/qgkNmMu.jpg

http://i.imgur.com/ilOMyDi.jpg

http://i.imgur.com/VyxBdeX.jpg

http://i.imgur.com/k3t87Ge.jpg

Hard and specific manifacturing. Realization in o-ring site in superior sheet of basin with cooling liquid and clock. It was a very accurate solution in order to allow also the maintenance of the clock. All was possible thanking my first love: Optimum milling machine.

http://i.imgur.com/7kROV0L.jpg

http://i.imgur.com/e6tQPo5.jpg

http://i.imgur.com/WNnf1gC.jpg

http://i.imgur.com/wwaIpYx.jpg

http://i.imgur.com/mwjg2y0.jpg

Milling of plexiglas sheets with pantograph cnc to create the ducts location on base top to split the liquid from basin to pumps, from pumps to radiators and, in fine, from radiators to hardware/waterblock. Liquid leak security system with o-ring.

http://i.imgur.com/dzCWhl4.jpg

http://i.imgur.com/td2wW0c.jpg

http://i.imgur.com/B4BTrrG.jpg

http://i.imgur.com/Zp7j4Ee.jpg

http://i.imgur.com/kxGTsMW.jpg

http://i.imgur.com/lBZY23Z.jpg

Superior sheet for o-ring compression. Ducts on emohasis.

http://i.imgur.com/wqzgXKa.jpg

http://i.imgur.com/cPMXT4s.jpg

http://i.imgur.com/FJq1aIy.jpg

http://i.imgur.com/tbQyusl.jpg

http://i.imgur.com/8Mvn436.jpg

Wooden cover of ducts system. In this way the system will be flat. Emptyings of bolts location is allowed by using of golden Cone Washer sponsor by Gosumodz. It will be the third visual contrast between golden and silver inox steel Cone Washer bolts.

http://i.imgur.com/zPnQtzW.jpg

http://i.imgur.com/nukD4nD.jpg

http://i.imgur.com/wKZjZRH.jpg

Two important details. Milling cnc sheet with project name to block naval handle located on the door and cnc sheet with start and reset pushbuttons.

http://i.imgur.com/uJA1R7Z.jpg

http://i.imgur.com/DL0b0s9.jpg

http://i.imgur.com/VDpzN1h.jpg

http://i.imgur.com/f7Bjr8l.jpg

Entrance design I/O and power supply on plexiglass sheet that will being milling. In fine, polishing of aluminium and brass parts.

http://i.imgur.com/6yoE3BY.jpg

http://i.imgur.com/bKbziAl.jpg

http://i.imgur.com/ynfL608.jpg

http://i.imgur.com/iydRCCr.jpg