wellmoon Posted December 27, 2015 Share Posted December 27, 2015 Hey all I've just bought and installed the H110i GT - first time I've had a water cooling product. Hardware seems to be connected up correctly - the fan power adapters are connected to the adapters coming off of the CPU block, fan connector is attached to the CPU_FAN header on the motherboard, sata power is connected, and I've got the CPU unit connected to a USB header on the motherboard also. I'm using the two fans that came with it. I've installed Corsair Link, but every time I start my machine I get the popup to say that new devices have been detected which require a reboot. I've tried doing the reboot cycle several times, and pressing cancel on the popup does little, the popup closes and just appears again immediately. The link software seems to work fine, I can open the app up and change settings, monitor temps, etc. Any ideas? Is something not connected up correctly? Link to comment Share on other sites More sharing options...
masiboss Posted December 27, 2015 Share Posted December 27, 2015 same here :/ Link to comment Share on other sites More sharing options...
red-ray Posted December 27, 2015 Share Posted December 27, 2015 I suspect doing as a say in http://forum.corsair.com/forums/showthread.php?t=153706 will resolve this. Link to comment Share on other sites More sharing options...
wellmoon Posted December 27, 2015 Author Share Posted December 27, 2015 Yep, that seems to have fixed the popup issue, thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.