Few Questions regarding the Link...

[Sabottx]

First off, I can't find within the software how to have it auto start during boot. I have created a profile within windows to start it. Where can I find it within the program?

The CPU temp is off by a lot. Here is my current temp as Corsair Link software reports: H100: 27C, CPU: 34-35C vs AIDA64 & system: 30C
I am assuming one of the readings is the hot liquid going to the rad?

Can I change the background picture to my 800D?

Why does the default AMD CPU continue to load even after I delete it and save my profile? (BTW, I have an Intel CPU)

I noticed my GPU temp increases while viewing the Link screen.

[randolla]

There is no setting as of now that will allow the Link to start up with windows. Perhaps that will be added to a software update.

Others have reported that the CPU temp will not match other readings. This may be due to how each reading is taken. Be sure that you are reading each one correctly. The H100 temp is the fluid temp.

To change your image, right click on the default image and then scroll over until you find the 800D. Be sure to save it.

As to your other questions, I have no idea other than to ask you if you have updated the software for the Link.