View Single Post
  #2  
Old 07-18-2010, 09:12 PM
Elganja Elganja is offline
Registered User
Elganja's PC Specs
 
Join Date: Nov 2009
Posts: 11
POST ID # = 457875
Elganja Reputation: 10
Default

Before, computer on air with a TRUE Ultra Extreme, push pull, lapped pretty loud setup


Bottom of the 800D, this a picture of the drive cage that I need to remove, my gtx240 radiator will go here (cpu loop radiator)


hole cut for radiator fan intake (you're looking at the bottom of the case here)


6 drilled rivets, 2 sanded down then punched out rivets, 2 screws, and some muscle = drive cage removed.


mounted the gtx240 radiator, the hole I cut matches very nicely and a 140mm magnetic fan filter covers it nicely as well. The fans on top of it, have blue led's


tubing ran to the gtx240 radiator, man was it a tight fit... but no kinks


psu mounted and the necessary cables were ran through to the otherside


gtx360 mounted and tubing ran, another tight fit... no kinks though... fans will have red led's
Reply With Quote