bgunn925

Thank you, this worked. I actually already had this in place with the LS100 controller's USB cable plugged into my monitor, but I didn't catch that it was working because there's a ~30 second delay between turning off the monitor and the strips turning off/reverting to the hardware profile. I finally got frustrated that it wasn't working and left it long enough to see that it does eventually turn off.

Perfect, thank you so much!

What's the safest way to roll back without jeopardizing my profiles?

Deleted the action but the issue persists

I'm having a very similar issue. My escape key is performing the escape function, but also opening a new Chrome browser window. In my default iCUE profile, I have a macro key on my Scimitar set to open a new browser window, I'm not sure if that's related.

Where did you find the download for the previous version?

My escape key is also opening a new browser window. I have one of my Scimitar macro keys set to open a new browser window, not sure if that's related.

I have configured the LS100 in Video Lighting mode -- is there a way to have the strips shut off or go to (0,0,0) when the monitor is off? I thought maybe I could trick it by setting the display to turn off after 1 minute, but the lights stay on anyway. I have a K95 -- can I assign a macro key to toggle the brightness of the LS100 controller? I suppose that I could copy the iCUE profile and switch the LS100 to Static (0,0,0) and just use a macro key to toggle profiles when I turn the monitor on/off. I feel like this could have been easily avoided by using the monitor's USB for power, so it could naturally lose power when the monitor shuts off. I have a similar product from Monster and this is how it works. It could have also reduced the cable count by one.

Hmm, sounds like the sort of thing maybe a strip of electrical tape applied under the LED strip might fix?

I just went to my local Frys and they had one in stock. They were nice enough to open it up so that I could check -- sure enough, it had the slots. Super annoying... I was thinking about using an LED strip to cover the holes from the inside. Do you think that would be an appropriate place for a strip? Is the glass tinted enough to where the black backside of the strip showing through the holes won't be an eyesore against the gray metal?

Any updates on this? Is it safe to buy now?

Does this support Trident Z RGB RAM? Does this sync with brightness information or just RGB values?

Could use Task Scheduler to Kill iCUE/Launch LINK w/ 'On workstation lock' trigger and do the reverse w/ 'On worstation unlock' trigger. Would need to write a very simple batch script to kill LINK/iCUE. Would need to adjust tasks created during installation to keep LINK from running at startup, etc. I'm already using Task Scheduler to swap out the iCUE XMP profiles to dim the system to ~10% brightness at night, which already involves a batch script with a component that kills iCUE. It would be easy enough to write the scripts required for these tasks -- might give it a go and report back.

I mean something enthusiast grade with tighter timings; something on Samsung B-die that I can overclock to 4GHz+

Are there plans to get the Vengeance Pro on RAM with better specs? I really want to switch from my Trident Z RGB 3600MHz CL16 kit but I don't want to take a performance hit for it.