The Corsair Support Forums  

Go Back   The Corsair Support Forums > Corsair Product Discussion > Memory > DDR3 Configuration and Tuning

Notices


Important Links
Great Threads
Forum Rules
FAQs
Edit System Specs
How to run Memtest86+
How to read CPU-Z
Memory / PSU Finder
Useful Tools
Memtest86+ v4.20
CPU-Z v1.63
ATTO v2.47
HDBENCH v3.40 b6
Super Pi
TrueCrypt v7.1a
SD Formatter 3.1
Audio Drivers
Vengeance 1500 v1.1
Vengeance 2000 v2.0.7
Gaming Software
K60/K90 Update
-M90 Game Profiles
SSD Firmware
Sandforce 5.05a
Enthusiasts
DDR1 IC Inquiry
DDR2 IC Inquiry
DDR3 IC Inquiry
Where to Buy
Retailers / Distributors
Online Store
RMA Request
Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 06-10-2012, 12:51 PM
mnyx mnyx is offline
Registered User
mnyx's PC Specs
 
Join Date: Jun 2012
Posts: 2
POST ID # = 583797
Question CMZ8GX3M2A1600C9R Memtest86 v4.20 Errors

hi my new system

several times a blue screen error
I decided to test memtest86 test time 4:36 hours
this result Is the product defective :( ?

Last edited by Wired; 06-10-2012 at 04:06 PM. Reason: removed specs; already in profile
Reply With Quote
  #2  
Old 06-10-2012, 03:20 PM
peanutz94's Avatar
peanutz94 peanutz94 is offline
Registered User
peanutz94's PC Specs
 
Join Date: Feb 2011
Location: Akron,Ohio
Posts: 6,447
POST ID # = 583815
Default

It may be. I would run memtest on each stick individually to see if you can narrow it down. If they both pass that way it may be some other issue.

Do you have the latest BIOS for your MB?
Reply With Quote
  #3  
Old 06-10-2012, 04:06 PM
mnyx mnyx is offline
Registered User
mnyx's PC Specs
 
Join Date: Jun 2012
Posts: 2
POST ID # = 583820
Default

okay I'll try and bios not the latest version ı downgrade bios because click bios 2 latest bios not runing but now update the bios and try and test thank u
Reply With Quote
  #4  
Old 06-13-2012, 02:01 PM
RAM GUY's Avatar
RAM GUY RAM GUY is offline
Corsair Product Guru
 
Join Date: Apr 2001
Location: Fremont, CA
Posts: 115,958
POST ID # = 584406
Default

Also if you look at your screen shot you are running the modules out of spec, DDR1600 at Cas 6-6-6-12.
You should check to be sure that you have the latest MB BIOS and then go to BIOS setup and load setup defaults and enable XMP Profile one and then test them again one module at a time and be sure they are running correct timings Cas 9-9-9-24 at DDR1600.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.